Owners Guide
Error Codes
Error Displayed Code Error Description Action to Take
Bin Sensor error
second intervals in the display. No
audible alarm will sound.
Failed temperature sensor. Machine operation will
immediately enter an OFF state.
Call service to have the
temperature sensor replaced.
System Sensor error
the display. No audible alarm will
sound.
Failed condenser temperature sensor. Machine operation
will continue but ice production cycle will not adapt to
Call service to have the
temperature sensor replaced.
Communication error
on the display.
Loss of communication between the main board and the
user interface.
Call service to have a
diagnostic check.
Error codes:
The ice machine is monitored continuously. Any OPEN or
SHORTED circuit condition with a temperature sensor or
miscommunications between the control and user interface
ICE
Options menu:
Normal and ECO mode:
Your ice machine comes with an optional "ECO" mode.
This new feature allows you to tailor ice production to a
ice production will slow and the appliance will use less
water and electricity. "ECO" mode should only
be initiated after there is a full bin of ice. To enter
• Press the "MENU" icon twice and the green
• Press and hold the "ON/OFF" icon until the
illuminated.
• To return to the standard operating rate press the
and remains illuminated.
ECO
USING YOUR ELECTRONIC CONTROL
Changing the Tri-Color lighting: (MP15CP
Models Only)
The light switch for changing
the light color is located in the toe
grille. Move the switch to the left
or right to change
Three position
slide light switch