Installation Sheet

15
DOOR REVERSAL
5. Remove bottom hinge from cabinet (two screws).
6. Remove screws on opposite side at bottom of cabinet.
7. Install hinge. Align hinge outer edge with cabinet. Do not
tighten screws all the way.
8. Remove screws from top of cabinet.
Figure 27
Figure 28
Figure 29
Figure 30
9. Use the 3 screws to attach hinge to top of cabinet - long,
straight edge of hinge should align to the outside edge of
cabinet. Do not tighten screws.
10. Rotate the door 180
0
and set onto bottom hinge - lift top
hinge enough to allow door to pass under it.
11. Push hinge down to insert pivot screw into hole in the
top of door. Tighten screws enough to safely hold the door
in place. Check that the door is square to the cabinet and
tighten all screws.
12. Align and adjust the door (see ALIGNMENT AND
ADJUSTMENT).
13. Install the grille.
Figure 31