Use and Care Guide

10
INSTALLATION
Adjusting ipper mullion screw
Adjusting ipper mullion height
Thickness
of a coin
Flipper
mullion
Flipper
mullion
Mullion
guide
Screw
Flipper
mullion
hinge
To adjust the ipper mullion:
1. Loosen the screw located on the ipper mullion hinge.
2. Adjust ipper mullion height. For proper connection with
the ipper mullion guide, there should be a separation
about the thickness of a coin (0.060 inches, or 1.5 mm)
between the guide and ipper mullion.
3. Re-tighten screw.
Figure 17
Figure 18