Owners Manual

20
1.234" (31.3 mm)
.991" (25.2 mm)
OVERLAY DOOR PANEL INSTALLATION
Step 8: Secure the cabinet
Use the #8 x
3
⁄4" black screws from the literature pack to
secure the counter top to the cabinet top through the holes
in the cabinet "Z" bracket.
Cabinet
"Z" bracket
#8 x
3
⁄4" black
screws
(3 places)
Figure 24
Step 7: Install the door
Carefully open the top and bottom hinges on the door being
careful as there are many pinch points. Place the hinges
over the 4 screws in the cabinet, 2 at the top and 2 at the
bottom and slide the door into position. Tighten the 4 hinge
screws with a phillips screwdriver. (See Figures 10 and
10a). Place wire harness from the grille and mount to the
bottom of the door with the screw and "P" clamp removed
in step 1. (See Figure 10b). Reconnect the wire harness,
(See Figure 11).
Figure 23