Manualshelf

Getting Started Guide

ManualsBrandsMarvel ManualsBeverage Centers24 Inch Built-In Dual Zone Beverage Center with 22 Bottle and 112 Can Capacity, Dynamic Cooling Technology, Thermal-Efficient Cabinet, Sabbath Mode, 3-in-1 Split Convertible Shelf, Dual Pane Glass Door, LED Interior Light, Multifunction Electric Controls,
12345678910
8
NOTE
To insert rack in the cabinet:
1. Align the left and right rack channels with the tracks in
the cabinet. Ensure an even track engagement on both
sides by gently pushing the rack into the cabinet until
it stops.
2. Before reloading the rack, ensure proper movement
of the travel stops in the left and right track rails by
pulling the rack out gently until it stops.
DOOR REVERSAL
Reversing the Shelf Spacers
Wine Rack Installation
To remove rack from the cabinet:
1. Remove any bottles stored on the rack.
2. Grasp the end of the rack and gently slide it out until it
stops.
3. Press the left rack release lever down. At the same
time lift the matching right rack release lever up.
Pull the rack out until it is free of the tracks and the
cabinet.
Do not remove the track rails from the cabinet.
To reverse the shim pattern:
1. Remove the outer glides keeping track of the shims.
2. Once the outer glides are removed, reverse the shims.
Left now goes to the right, and right goes to the left.
3. Install the outer glides back in and install the wine racks.
Figure 10
Figure 11