Owners Guide

11
Installation Operation and Maintenance Instructions
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION COMMAND NOTES
ON/OFF Press and hold for 5 seconds Unit will turn On or OFF
Leave interior light on
Press and release to leave interior light
on for 3 hours; press again to deactivate
After 3 hours, factory default is restored; light will turn on
when door is open
Adjust Temperature Press or and release
When the display is ashing, press or to adjust
the set point temperature. Note: temperature displayed
is the actual temperature inside unit
Toggle between
º
F /
º
C Hold and for 5 seconds The display will change units
Enable Sabbath Mode
Press and hold for 5 seconds and
release
The
o
F /
o
C symbol will ash briey after 5 seconds.
Interior light and display will go dark and remain so until
user resets mode - unit continues to operate
Disable Sabbath Mode Press and release Display and interior light return to normal operation
Showroom Mode Hold and for 5 seconds
Display will show SH for 2 seconds. Interior light and
display will function normally, but the compressor and
fans will not be energized. Repeat command to return to
normal operation. Display will show EH for 2 seconds.
DOOR ALERT NOTIFICATION
When the door is left open for more than 5 minutes:
• will appear in display
• Close door to reset