Owners Guide

!
CAUTION
Weight of overlay door panel must not exceed 15
pounds (6.8 kg).
Loosen (do not remove ) these
2 phillips head screws on the
top and bottom hinges
Cabinet
"Z" Bracket
"P" clamp
and screw
Wire connector
see
Bottom of
door
Press and hold down this
tab on the wire connector
and pull the connector apart.
OVERLAY DOOR PANEL INSTALLATION - MP15C MODELS ONLY
Step 2: Remove the door gasket

corner of the door remove the magnetic door gasket from
it's retainer by pulling it away from the interior side of the
. 

each side and 2 at the top and bottom which are used to
fasten the panel to the front of the door. The screws are
provided in the literature pack.
Overlay panel

of door.
Magnetic Gasket
remove starting at a

away from the door.
Holes in
gasket
retainer.
Figure 33a
Figure 33
Step 3: Cut and drill the overlay panel
Depending on your model cut the overlay door panel to
the dimensions shown in the images on the next page.