Owners Guide

4.
5.
6.
If you are installing your keg refrigerator under a coun-
ter you will need to drill 5 holes in the counter top to
PRXQWWKHWRZHU7KH¿UVWKROHLVD
1
»2" diameter hole
located at the center of the tower for the beer line, lo-
cate approximately 13
1
»2FPIURPWKHIURQWHGJH
of the counter top (based on a counter top depth of
25
5
»161H[WGULOOWKHWRZHUPRXQWLQJKROHVSHUWKHGL-
mensions. The hole diameter is dependent on the
counter top material and if screw anchors are required.
The screws supplied are in the literature pack and are a
#10 x 1" type AB stainless steel screw. Mark and cut
the rectangular cutout for the drain sump. After the
holes are drilled and the keg refrigerator is in place
under the counter top feed the beer line through the
tower gasket, the 1
1
»2" hole in the counter top and the
hole in the top of the keg refrigerator. Mount the tower
to the counter top with the 4 screws provided. Place
the counter top drain sump, from the literature pack, in
the rectangular hole with the radius cutout to the rear
around the tower and place the grate in the sump.
Mount the regulator to the CO
2WDQNFRQQHFWLRQ
B
Note that the regulator has left hand threads and has to
be turned counterclockwise to tighten. Tighten with the
adjustable wrench or the 1
1
»8" open end wrench.
&RQQHFWWKHUHGDLUOLQHVIURPWKHUHJXODWRUWRWKH
largeDLUOLQH¿WWLQJRQWKHNHJFRXSOHUZLWKDlarge
KRVHFODPSFRQQHFWLRQ
C
7. Connect the clear beer line from the tower to the small
DLUOLQHILWWLQJRQWKHNHJFRXSOHUZLWKDsmall hose
FODPSFRQQHFWLRQ
A
8. Locate the CO2 tank in the corner of the refrigerator
and secure with the chain. Close the faucet handle on
the tower.
Diameter
to suit
Rear of counter top
6
1
»8"
FP
12
1
»4"
FP
2
7
»8"
FP
4
1
»4"
FP
6
3
»8"
FP
1
3
»8"
FP
typical
1
1
»2PP
Diameter
counter
top depth
25
5
»16"
FP
1
»4PP
radii,
typical
Grate from top of
beer dispenser
Counter top
sump from
literature pack
Tower
!
CAUTION
The cutout dimensions shown above are based on a
25
5
»16FPGHHSFRXQWHUWRS<RXUFRXQWHUWRSPD\
be different than this and require other front to back
dimen-sioning. Refer to the product dimensions when
determining the required dimensions.
USING YOUR BEER DISPENSER
10