Manual and User Guide

OVERLAY DOOR PANEL INSTALLATION

Step 2: Remove the door gasket

With the door laying on a at surface and starting

at a corner of the door remove the magnetic door

gasket from the interior side of the door, see

Figure 13. Set the gasket aside on a at surface.

There are 10 holes in the gasket retainer extru-

sions, (3 on each side and 2 at the top and bottom

which are used to fasten the panel to the front of

the door. The screws are provided in the literature

pack.

Figure 12

Press and hold down this

tab on the wire connector

and pull the connector apart.

Figure 13

Figure 13a

Overlay panel ush

with top of door.

Holes in

gasket

retainer.

Magnetic

Gasket remove

starting at a

corner, grasp

and pull away

from the door.

Overlay

panel to be

centered on

width of door.