DIABLO ARTIGLIO ATTILA PINOCCHIO SUBSOILER RANGE Three different jobs in one pass
SUBSOILERS 3 DIFFERENT JOBS IN 1 PASS ● Compaction layers shattering Maschio sub-soilers break up compaction layers, promote aeration, limit runoff and improve water infiltration which helps the soil retain moisture. The shank inclination has been designed to allow for better penetration even in the toughest soils while the high frame clearance and the well-spaced shanks guarantee perfect residues flow.
MASCHIO - SUBSOILERS A complete range of sUBSOILERS The Maschio sub-soilers let you to finish three different jobs in one-pass, decreasing your fuel costs: soil shattering (until 28’’ depth), mulching and levelling. The heavy-duty frame, designed in simple layout with few wear parts and grease points, reduces drastically the maintenance time and costs.
SUBSOILERS HEAVY-DUTY SHANKS Progressive inclination 1,2” 1,4” or 1,6” mm thick shanks are characterized by an increasing inclination from the tip to the top (from 20° to 60°). It improves soil penetration reducing HP requirements. Clod breaking blade Central bolt-on blade improves clods shattering, improving density layer destruction. Adjustable side blades 5,5” bolt-on side tips horizontally shatter the soil.
Hydro-pneumatic system Auto-reset circuit with double nitrogen accumulator and safety valve prevents frame damages and reduces downtime resulting from shear bolts replacement. Once the obstacle is overcome, the system brings the shank back to its working position. The nitrogen accumulator capacities are 2 gal for the hydro-pneumatic models with 5 shanks and 4,5 gal for the versions with 7 and 9 shanks.
SUBSOILERS INTENSE MIX AND LEVELLING Two gangs of notched discs with ø of 24’’ and thickness of 1/3’’ ensure optimal soil straw mixing even on a very high density residues. The perfect overlapping between front and rear gangs guarantees an extremely consistent tillage all across the working width.
SUB-CONSOLIDATION Rear disc gangs down-pressure is equally distribuited all over working width at 2-3” depth. This sub-compaction effect keeps ground moisture at the best for an optimal rooting and increases soil bearing capacity; this means that you can seed with the bigger planters even on wet soil. Moreover, the top soil is well refined allowing a perfect seed emeregence.
SUBSOILERS DIABLO Heavy-duty frame DIABLO frame is extremely sturdy! The folding version is equipped with 6 cylinders, 3 per side, that ensure a constant working depth preventing frame oscillations, torsions and then damages. The ground clearance is 35” while the gangs are 49” spaced. Great maneuvrability and easy transport Cat. 4 draw bar with Ø of 2” towing eye (available also cat. 5 and 3 with towing eyes Ø of 2” and 3”, respectively) and large transport tyres (550/60-22.
11
SUBSOILERS QUICK-MATCHING DIABLO is equipped with a heavy-duty 2” (Cat. 4) towing eye drawbar. Drawbar inclination can be comfortably adjusted from tractor seat just acting on the hydraulic cylinder to ensure maximum stability in transport and to set shank gangs down-pressure on the run.
SUBSOILERS DOUBLE SPIKE ROLLER The sub-soiler models PINOCCHIO, ATTILA, ARTIGLIO and ARTIGLIO MAGNUM are equipped with a double counterrotating spike roller having Ø of 6” or 9” and a blades number variable from 16 (for 4,3’ versions) to 96 (for 16’ versions). The high spikes number and the large diameter improve residue sizing and incorporation, clods shattering and soil levelling.
Easy adjustments The double roller set the working depth. By two sturdy cylinders, working depth can be easily adjusted from the cab. In presence of high quantity of residues, it is possible to change the rear rollers inclination by two mechanical jacks.
SUBSOILERS ARTIGLIO MAGNUM The ARTIGLIO MAGNUM requires high-power tractors (from 190 to 400 HP) and it can reach a working depth up to 28”. The shanks (from 5 to 9 according to the working width) are 1,6” thick and they are equipped with shear bolts safety system (5 spare bolts come as standard). The welded frame has an ultra-high soil clearance (3.8‘) and the two gangs are 3’ spaced.
ARTIGLIO The ARTIGLIO and ARTIGLIO HYDRO require from 150 to 390 HP, according to the working width (from 8’ to 16’) and the number of shanks (from 5 to 11). The 1,2” thick shanks are equipped with shear bolts safety system (5 spare bolts come as standard) or with hydro-pneumatic auto-reset circuit with double nitrogen accumulator and safety valve (only on HYDRO versions). These models are characterized by a completely welded frame with 3’ for both soil clearance and gangs spacing.
SUBSOILERS ATTILA The ATTILA and ATTILA HYDRO models have been developed for medium HP tractors (from 110 to 240 HP). They are characterized by a maximum working depth up to 18”, hydraulically adjustable from the cab. Different working widths are available (from 8” to 13”) with a shanks number variable from 5 to 9. The 1,2” thick shanks are equipped with shear bolts safety system or with hydro-pneumatic auto-reset circuit with double nitrogen accumulator and safety valves (only on HYDRO versions).
PINOCCHIO The PINOCCHIO model is designed for low or medium power tractors (from 50 to 160 HP). It is characterized by a maximum working depth of 18”. PINOCCHIO is available in different widths (from 4,3’ and 10’) and shanks number (from 3 to 7). The 1,2” thick shanks are equipped with shear bolts safety system and the double rear roller can be manually adjusted using a pin system. The bolt-on frame has a ground clearance of 2,6’ while the front and the rear gangs are 2,1’ spaced.
SUBSOILERS TECHNICAL SPECIFICATIONS KW DIABLO ft N. DISCS N. TINES in (1) 500/11 294 - 367 400 - 500 16 11 2 x 23 22 600/13 368 - 441 450 - 550 20 13 2 x 27 22 700/15 368 - 441 500 - 600 23 15 2 x 31 22 (1) Working width CAT. CAT. 3 CAT. 4 CAT. 5 K 80 K 110 PIVOT / BALL Ø 38 50 70 80 110 EYE / BALL Ø 50 51 71 80 110 ARTIGLIO MAGNUM KW ft HP N.
KW ARTIGLIO ft HP N. TINES lb in (1) 250/5 110 - 147 150 - 220 8 5 26 3351 300/5 125 - 162 170 - 220 10 5 26 3836 300/7 140 - 184 190 - 250 10 7 26 4409 400/7 155 - 199 210 - 270 13 7 26 6173 400/9 161 - 242 220 - 330 13 9 26 6834 500/11 184 - 287 250 - 390 16 11 26 7423 ARTIGLIO HYDRO 250/5 110 - 184 150 - 250 8 5 26 4718 300/7 132 - 206 180 - 280 10 7 26 5688 184 - 257 250 - 350 13 9 26 8598 400/9 (1) Working width KW ATTILA HP N.
Headquarters Via Marcello, 73 35011 Campodarsego - Padova - Italy Tel. +39 049 9289810 - Fax +39 049 9289900 e-mail: info@maschio.it http://www.maschionet.com MASCHIO-GASPARDO North America, Inc. 120 North Scott Park Road Eldridge, IA 52748 Phone: (888) 648-7462 Fax: (563) 285-9938 Production plant Via Mussons, 7 I - 33075 Morsano al Tagliamento (PN) Italy Tel. +39 0434 695410 - Fax +39 0434 695425 Technical datas and models shown into this catalogue are not binding.