440-1060-0
NOTE WIRELESS W I RELESS M I CROPH ON E SYSTEM Ta ble of Cont e nt s Pa ge 1. I nt r odu ct ion …………………………………………………………….….….…….……….…… 1 2. Sa fe t y ………………………………………………………………………………….………….……… 1 3. En vir onm e nt ………………………………………………………………………………………... 1 4. W ir e le ss N ot e….………………………………………….………………………………..……... 1 5. Pr odu ct D e scr ipt ion …………….…………………..……………………..…….………..… 2 5.1 Receivers 5.2 Handheld Transm it t er Microphone 5.3 Bodypack Transm it t er 6. Ba sic Con n e ct ions……………….
WI RELESS WIRELESS NOTE FEATURES & SPECIFICATIONS WIRELESS 9. System Feature FCC Statement This device complies with part 15 of the FCC rules.
WI RELESS 7.6 Setting up the bodypack transmitter A. Connecting a microphone Open the battery cover. Push the MIC/LINE switch to “MIC” and use the supplied screwdriver to adjust the GAIN at appropriate position. WIRELESS PRODUCT DESCRIPTION TROUBLE SHOOTING 5. Product Description 5.1 Receivers The receivers are used with our 15 or 16-channel selectable channels transmitters. (The number of frequency channels depends on local regulations.
WI RELESS SETTING UP PRODUCT DESCRIPTION WIRELESS 7.3 Setting up channel on receiver 5.1.2 Single Channel, Mini Case Non Diversity, Front Fixed Antenna Notice: Do not put two or more transmitters operating nearby when setting up the frequency channel. Please keep transmitter at least one meter away from receiver. Use the AC adaptor to connect the DC input connector for on the receiver and check the frequency.
WI RELESS SETTING UP WIRELESS PRODUCT DESCRIPTION 7. Setting Up NOTICE: Prior to setting up, please check that the transmitter and receiver are tuned to the same frequency. Two or more transmitters operating in the same frequency can not be used at the same time and area. So for each extra transmitter, please select a different frequency which can be used simultaneously at local area. 5.1.3 Dual Channel, Mini Case Non Diversity, Front Fixed Antenna 7.
WI RELESS 1. Antenna: 2. Power Indicator: 3. AF Indicator: 4. 5. Diversity A. B Indicator: This LED lights to show that antenna has received the RF Signal. RF Indicator: This LED lights to indicate that signal is being received 6. Balanced Output: 3-pin XLR connector provides balanced low-impedance output 7. Unbalanced Output: Unbalanced 6.3mm mono jack audio output for connecting to, e.g., a guitar amplifier. 8. Mic/Line Switch: Select output of XLR balanced connector or 6.
WI RELESS 5.3 Bodypack Transmitter The bodypack transmitter operates in UHF band frequency with PLL synthesized control. UHF 16 preprogrammed selectable frequencies to avoid interference. Uni-directional condenser cartridges with different characters for various choices. Use 1.5V x 2 AA size dry or rechargeable batteries for low operating cost. WIRELESS PRODUCT DESCRIPTION BASIC CONNECTIONS 5.2 Handheld Microphone The handheld microphone operates in UHF band frequency with PLL synthesized control.
