User's Manual

WIRELESS

PRODUCT DESCRIPTION

5.3 Bodypack Transmitter

The bodypack transmitter operates in UHF band frequency with PLL synthesized control. UHF 64

preprogrammed selectable frequencies to avoid interference. Uni-directional condenser capsules

with different characters for various choices. Use 1.5V x 2 AA size dry or rechargeable batteries

for low operating cost.

On/Off Switch:

Turns transmitter power on and off.

2. Mini XLR /3.5j connector: The included electret lapel microphone is inserted into the

connector on transmitter.

3. Low Battery LED: LED indicates battery life status. Switching the power to "ON", the

LED flashing once indicates that the transmitter has sufficient power. If the LED stayed on,

it indicates that the battery has insufficient power and should be changed soon. If the status

LED fails to flash, the battery is either dead or not positioned correctly, and you should

correct the positioning or change the battery.

4. Mic/Line Selector (optional for use with mini XLR connector) : The switch sets the

audio input either to microphone level or line level.

5. Antenna: Permanently connected, helical antenna.

6. Group Selector: Changes transmitter Group setting.

7. Channel Selector: Changes transmitter Channel setting.

8. Gain.: The rotary control adjusts the sensitivity of the transmitter’s audio to the level of the

connected lapel microphone or instrument.

9. Mic Unit: The uni-directional electret condenser unit features the wide frequency response

for warm, rich bass and clear sound.

10. Tie Clip: To clip on the tie or lapel for free-movement.

11. Cable: With mini XLR jack or 3.5j screw type plug cable to connect the transmitter.

12. Battery Compartment: Insert two AA dry or rechargeable batteries into the compartment

and make sure that the polarity of batteries is correct.

13. Charging Input: for charging rechargeable batteries inside the battery compartment using

the using a supplied cable with 1.5j DC plugs.

Wireless Microphone