User's Manual

ManualsBrandsMascot Electric ManualsAudio EquipmentWireless Body Pack Wireless Microphone

WIRELESS MICROPHONE SYSTEM

1. Introduction

………………………………………….……….……….……

2. Safety …………………………………………………………………………

3. Environment

………………………………………………………………...

4. Wireless Note… ..………………………………………….……………...

5. Product Description ………………………………..………….………..…

5.1 Receiver Module

5.2 Handheld Microphone

5.3 Bodypack Transmitter

6. System Feature……………………………………….…………………...

7. System Specification……………………………………………..……….

Table of Contents

Summary of content (7 pages)

PAGE 1
WIRELESS MICROPHONE SYSTEM Table of Contents 1. Introduction … … … … … … … … … … … … … … … … .… … … .… … … .… … 1 2. Safety … … … … … … … … … … … … … … … … … … … … … … … … … … … … 1 3. Environment … … … … … … … … … … … … … … … … … … … … … … … … ... 1 4. Wireless Note… ..… … … … … … … … … … … … … … … … .… … … … … ... 1 5. Product Description … … … … … … … … … … … … ..… … … … .… … … ..… 2 5.1 Receiver Module 5.2 Handheld Microphone 5.3 Bodypack Transmitter 6.
PAGE 2
WIRELESS WIRELESS NOTE FCC Statement This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions: (1)This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 3
WIRELESS PRODUCT DESCRIPTION 5. Product Description 5.1 Receiver Module This is a diversity receiver module suitable for inserting into PA system or portable amplifier. It can use with our 16- or 64-channel selectable transmitters. The receiver module operates in UHF band frequency with PLL synthesized control.
PAGE 4
WIRELESS PRODUCT DESCRIPTION 1. Diversity A. B Indicator: 2. Group Selector: Rotates this selector to choose a group number. 3. Channel Selector: 4. This LED lights to indicate that RF signal is being received. Rotates this selector to choose a channel number. 5. Level Control: This rotary control adjusts the receiver output level to match the input sensitivity of an audio mixer or amplifier RF Input: Uses 50 Ohm coaxial cable to connect with UHF antenna. 6. Ground: 7. AF Output: 8.
PAGE 5
WIRELESS PRODUCT DESCRIPTION 5.2 Handheld Microphone The handheld microphone operates in UHF band frequency with PLL synthesized control. UHF 64 preprogrammed selectable frequencies to avoid interference. Uni-directional dynamic or uni-directional condenser capsules with different characters for various choices. Use 1.5V x 2 AA size batteries for low operating cost. ¬ - ® ° 1 8 2 3 7 6 4 5 GR. 81 2 7 3 6 4 5 CH. ¯ CHANNEL SELECTOR ± ² ´ ³ 1.
PAGE 6
WIRELESS PRODUCT DESCRIPTION 5.3 Bodypack Transmitter The bodypack transmitter operates in UHF band frequency with PLL synthesized control. UHF 64 preprogrammed selectable frequencies to avoid interference. Uni-directional condenser capsules with different characters for various choices. Use 1.5V x 2 AA size dry or rechargeable batteries for low operating cost. ° ® ¯ - µ ± ´ ¬ 12 13 ² ³ 1. On/Off Switch: Turns transmitter power on and off. 2. Mini XLR /3.
PAGE 7
WIRELESS FEATURES & SPECIFICATIONS 6. System Feature Ø Operating in UHF band frequency with synthesizer controlled. Ø The wireless microphone system with 16 or 64 selectable frequencies via Phase Locked Loop (PLL) circuitry makes it easy to choose non-interfered channels. Ø Super high sensitivity, extremely low noise transmission and reception. Ø SMT assembled PCB module ensures the quality and stability. 7.