User's Manual

3.2 Handheld Microphone

The handheld microphone operates in UHF band frequency with PLL synthesized control. UHF

16 preprogrammed selectable frequencies to avoid interference. Uni-directional dynamic or

uni-directional condenser capsules with different characters for various choices. Use 2 x DC1.5V

AA size dry or rechargeable batteries for low operating cost.

1. Grille: Protects the microphone capsule and helps reduce breath sounds and wind noise. The

grille for the various microphone capsules differ in appearance.

2. Low Battery LED: LED indicates battery life status. When turn on the power, the LED will

stay on to indicate the batteries have sufficient power. Contrarily, if the LED fails to light, the

battery is either dead or not positioned correctly. If the LED stays flashing, it indicates that the

battery will out of power soon and should be changed.

3. Power: Press for 2 seconds to turn transmitter on or off.

4. Battery Compartment: Insert two AA dry or rechargeable batteries into the compartment and

make sure that the polarity of batteries is correct.

5. Channel Selector: Changes transmitter Channel setting.

6. Battery Cover: Unscrew to expose battery compartment and Channel selector.

7. Color Clip: This color clip helps to mark the same frequency of receiver and transmitter.