Certificate

Declaration of
Conformity
According to ISO/IEC Guide 22 and EN 45014.
We, Mascot Electronics A/S
declare under our sole responsibility that the products:
Battery Charger for Lead-Acid or Li-Ion-Batteries
(also for use with Medical Equipment)
Type: 2240 (with detachable mains cord / 2-pins IEC 60320 inlet or with non-detachable mains cord)
(Version protected against ingress according to IP67, standard EN 60529, is available)
Type: 2241
(with exchangeable mains plug-adapters or detachable mains cord)
Data: Input: max.0.35A 100-240VAC 50-60 Hz, Class II
Versions for Lead-Acid Batteries:
Output: 6V-version: 7.35VDC max. 1.3A
12V-version: 14.7VDC max. 1.0A
24V-version: 29.4VDC max. 0.5A
36V-version: 44.1VDC max. 0.35A
Versions for Li-Ion Batteries:
Output: 1-cells version: 4.1 or 4.2VDC max. 1.3A
2-cells version: 8.2 or 8.4VDC max. 1.3A
3-cells version: 12.3 or 12.6VDC max. 1.2A
4-cells version: 16.4 or 16.8VDC max. 0.9A
5-cells version: 20.5 or 21.0VDC max. 0.75A
6-cells version: 24.6 or 25.2VDC max. 0.65A
7-cells version: 28.7 or 29.4VDC max. 0.56A
are in conformity with the following standards or other normative documents:
Electrical Safety:
EN 60950-1
(EN 60950-1:2006 +/A11:2009, /A1:2010 & /A12:2011) (IT-equipment)
EN 60601-1 (EN 60601-1:2006 +/AC:2010 +/A1:201X DOA 2012-11-17) (Medical electrical equipment, 3
rd
Ed.)
Electromagnetic Compatibility (EMC):
EN 61000-6-1
(EN 61000-6-1:2007) (Immunity-residential, commercial & light-industrial environment)
EN 61000-6-3 (EN 61000-6-3:2007) (Emission-residential, commercial & light-industrial environment)
EN 55022 (EN 55022:2010) (Emission-IT-Equipment)
EN 55024 (EN 55024:2010) (Immunity-IT-Equipment)
EN 60601-1-2 (EN 60601-1-2:2007 +/AC:2010) (Medical equipment, EMC - Requirements and tests)
following the provisions of EU-Directives:
2006/95/EC
(repealing 73/23/EEC) (Low Voltage Directive, LVD)
2004/108/EC (repealing 89/336/EEC) (EMC Directive)
93/42/EEC (General Medical Devices Directive)
2009/125/EC (repealing 2005/32/EC & 2008/28/EC) (Energy-related Products Directive, ErP)
2011/65/EU (repealing 2002/95/EC & 2008/35/EC) (Restriction on use of Hazardous Substances in EEE, RoHS2)
and are produced under a quality system acc. to EN 29001:2008 (ISO 9001:2008).
Place of issue: Date of issue:
Fredrikstad, Norway 14 November 2012
Finn-Erik Wallin
Product Compliance Manager
Mascot Electronics A/S
Postal address: P.O. Box 177
N-1601 Fredrikstad - Norway
Visiting Address: Mosseveien 109
N-1624 Gressvik - Norway
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.mascot.no