Quick Start Guide

10
Press the “SET” button, GR and CH
digits will stop flashing, and “SCAN” is
done.
Press the “SET” button, “SCAN” will
stop flashing,it will searching the free
channel automatically.
Press or button to select the
“SCAN” mode.
Press the “SET” button for 2 seconds,
“PRESET”
or “MANUAL”
or “SCAN” mode
will flash.
If the system fails to select
free-interference channels, it will
automatically scan available channels
from all frequency ranges.
Press the “SET” button, CH digit will
stop flashing and “SCAN” is done.
NOTE: If user needs to set up multi-receiver system, please keep your previous
receiver-microphone pair power on. Then go no to next scanning procedure.
Set interference-free channel by frequency scan function.
Scan Mode