Quick Start Guide

Press or button to select GR number.
Set multiple constructions by using preset channels. Excluding the interference from external,
up to 12 system can be operated simultaneously in each group (Region dependent).
Preset Mode
Press the “SET” button, “PRESET” will
stop flashing. GR digit will flash
simultaneously.
11
Press “SET” button for 2 seconds,
“PRESET”
or “MANUAL”
or “SCAN” mode
will flash.
Press or button to select the
“PRESET” mode.
Press the “SET” button,GR number stops
flashing and CH digit will flash simultaneously.
Press or button to select CH number.
Press the “SET” button,CH digit will stop
flashing and “PRESET” is done.
NOTE: When there is any outside interference on the current preset group, please switch to
use next preset group. If 8 preset groups are all under interference, please use scan mode
to set up system.