Quick Start Guide

7
1. Power Button: Press for 2 seconds to power the microphone on or off.
2. Mute Button: With the transmitter on, a slight press for button will toggle between mute
and unmute function.
3. Power LED: Indicate the power / low battery level status.
4. MUTE LED: Blue LED light on in mute status.
5. SYNC Button: Press to actuate the synchronization process with the receiver.
6. LCD Display: Display group, channel and battery power level.
7. Battery compartment: Insert two AA size batteries into the compartment
and make sure that the polarity of batteries is correct.
8. Mini XLR Connector: Connect to the lapel microphone or headset microphone.
9. Gain Switch: The switch sets the audio input to -20dB, -10dB, 0dB.
LED Indicator Status
Green Ready
Flashing Green The synchronization process is actuated.
Low battery power when less than 10 minutes operationFlashing Red
UT-61
Bodypack Transmitter
6
2
4
3
1
7
8
5
9