User's Manual

Rad-87 Pulse CO-Oximeter Operator’s Manual
2-1
2
System Description
Introduction
The Rad-87 Pulse CO-Oximeters are full featured devices designed for ease of operation. All
pulse CO-Oximetry mea
surement information, as well as instrument status data, is displayed on
the front panel of the device. All user input is handled by control buttons on the front panel. The
sensor cable connections are located on the left side of the front panel for the Rad-87 horizontal
instrument and the bottom of the front panel for the Rad-87 vertical device.
■ Rad-87 offers full Masimo SET technology in a small compact device.
■ Rad-87 supports the full line of Masimo sensors and patient cables (see Section 8,
Sensors and Patient Cables).
■ Rad-87 supports standardization of sensors, and pulse CO-Oximetry technology
throughout the hospital.
■ The LCD Display identifies system settings, monitoring modes, alarm limits and
information from Patient SafetyNet or Philips VueLink (when connected). The LCD is located on
top of the instrument (Horizontal) or on the left of the instrument (Vertical).