User's Manual

2-2
Rad-87 Pulse CO-Oximeter Operator’s Manual
2
System Description
CONTROL / INDICATOR DESCRIPTION
1
Device Profile
LED
The Device (instrument) Profile LED illuminates when the instru-
ment has been set to user configured "default" settings. Upon
power up, the user configured default settings are retained and
the Device Profile LED remain lit.
When user configured default settings are active, any changes
to the default settings cause the Device Profile LED to turn off
until the instrument is returned to the user configured default
settings or powered off.
2
Sensitivity
Button/Indicator
Used to set the instrument into Maximum Sensitivity, Normal
Sensitivity, or APOD Mode.
3
LCD Display
1234567890123456
0123456789123456
The LCD display identifies system settings, monitoring modes,
alarm limits, and information from Patient SafetyNet or Philips
VueLink (when connected).
4
Signal I.Q. Index
The Signal I.Q. provides an indication of the quality of the
acquired signal as well as the timing of the pulse. A green verti-
cal LED bar rises and falls with the pulse, where the height of
the bar indicates the quality of the signal.
5
Perfusion Index
The Perfusion Index provides an indication of the percentage of
pulsatile signal to non pulsatile signal.
Rad-87 Pulse CO-Oximeter - Horizontal
NORM
APOD
MAX
SENSITIVITY
MODE
rbc monitor
Rad-87
APOD
APOD
MAX
MAX
SENSITIVITY
DISPLAY
NORM
NORM
ENTER
NORM
APOD
MAX
SENSITIVITY
MODE
rbc monitor
Rad-87
APOD
APOD
MAX
MAX
SENSITIVITY
DISPLAY
NORM
NORM
ENTER
RI
RRa
SIQa
12
1 3
2
4
5
6
7
8
9
12
13
14
1110
1618
17
19
20
21
15