User's Manual

2-4
Rad-87 Pulse CO-Oximeter Operator’s Manual
2
System Description
CONTROL / INDICATOR DESCRIPTION
12
Enter Button
Used to enter the setup menus and to select/activate certain
entries within the menu/setup system.
13
Brightness
Button
Controls the level of the brightness for the LED display by provid-
ing 4 levels of brightness. Each press of the button increases
the brightness one level. Once level 4 is accessed, an additional
press of the button returns the brightness to level 1. Press the
Enter Button to save the desired choice.
14
Up Button
Down Button
Use these buttons to adjust the volume of the pulse beep tone.
Within the menu/setup system, these buttons are used to select
values within each menu option or the numeric value for the
parameter/measurement alarm feature.
Pressing and holding down these buttons allow for the rapid
scrolling of alarm limits.
15
Respiration
Indicator
RI
The Respiration Indicator (RI) displays the level of sound that is
detected by the Acoustic Respiration Sensor. A tall vertical line
indicates a high sound level, while a short vertical line indicates
a low sound level. During SpO
2
only or combined SpO
2
and
Rainbow Acoustic Monitoring, the bar will be green. During
Rainbow Acoustic Monitoring only, the bar will be orange.
16
Rainbow
Acoustic
Monitoring
Signal Quality
SIQa
The Rainbow Acoustic Monitoring Signal Quality (SIQa) displays
the confidence in the RRa value displayed on the monitor. A tall
vertical line indicates high confidence, while a short vertical line
indicates low confidence. During SpO
2
only or combined SpO
2
and Rainbow Acoustic Monitoring, the bar will be green. During
Rainbow Acoustic Monitoring only, the bar will be orange.
17
Battery Charge
Level Indicator
Provides a visual representation of the battery charge status.
When plugged into an AC outlet, only the first bar is illuminated.
When unplugged, bars illuminate to indicate battery charge. As
the battery discharges power, bar illumination decreases from
right to left.
A low battery status is indicated by a low audible beep and the
first battery bar to the left flashing green.
18
AC Power
Indicator
The AC Power Indicator is illuminated when the Rad-87 is con-
nected to AC power and during battery charging.
19
Power Button
Used to turn the instrument on and off. Press the button once
to power on the device. Press the button for 2 seconds to power
off the device.
20
Pulse
CO-Oximeter
Patient Cable
Connector
Connects to a Masimo Pulse CO-Oximeter sensor or Masimo
Pulse CO-Oximeter Patient Cable with a sensor.
21
Speaker
Provides audible indication of alarm conditions, pulse tone and
feedback for key-presses.