User's Manual

Rad-87 Pulse CO-Oximeter Operator’s Manual
4-17
4
Operation
Display Screens Showing RRa on Screen 1, SpHb on Screen 2 and PVI on Screen 3
10.1 3
20
%SpCO
1.6
12
13
76
RRa
RISIQa
SIQa
SIQa
Display Screens Showing PVI on Screen 1 and SpHb on Screen 2
Screen 1
Home display screen
Screen
2
Screen 3
3
1.6
10.1
201376
SIQa SIQa SIQa
Setup Menu
This section gives an overview of the Rad-87 menu selections available. To access the menu
levels and navigate through the menu selections, use the front panel buttons, Enter Button and
Up/Down Buttons as indicated in the following sections. Sub-sections describe each menu item
in more detail. The Rad-87 has options that allow user configuration to accommodate specific
needs.
Menu Navigation
The Rad-87 set-up and configuration options are accessed through the menu system. Three
levels of menus are available to the user. Once a menu level is accessed, a front panel button
(Level 1 only) or the Enter Button (Level 2 and 3) is used to move from one option to the next
allowing repeated cycling through the options. The Up and Down Buttons are used to adjust
values within each option. The parameter/measurement value is set when the Enter Button is
pressed. Pressing the Display Button exits the menus and returns the instrument to Screen 1.
When accessing the Rad-87 menu, each selection will be communicated visually on the LED
(front of device) and LCD (top of device) displays, simultaneously.
NOTE: The Rad-87 will automatically ‘time out’ of the setup menu after 30 seconds with no
button presses.