User's Manual

4-20
Rad-87 Pulse CO-Oximeter Operator’s Manual
4
Operation
Setup Menu Level 1, continued
Parameter/Measurement Alarm Limits - Screen 3
To access alarm limits for parameters/measurements contained on Screen 3, press the Display
Button two times to move from Screen 1 to Screen 3. Press the Alarm Limits Button from Screen
3 to access the Alarm Limits menu for Screen 3 parameters/measurements.
BUTTONS SETTINGS
Use the Alarm Limits
Button to access the
alarm limits options
and move between
options.
Press once
%SpMet LO
Use Up or Down Buttons to adjust the
value to the desired setting
AND
press the Alarm Limits Button or Enter
Button to accept the setting and move to
the next option. Once the High Pulse rate
limit is accessed an additional press of
the Alarm Limits Button or Enter Button
will return the instrument to Screen 3.
OR
press the Display Button to exit at any time
and return to Screen 3.
Press 2x
%SpMet HI
Press 3x
%SpCO LO
Press 4x
%SpCO HI
Press 5x
PVI LO
Press 6x
PVI HI
NOTE: User default settings can be changed for specific patient environments.
LED Brightness
The Display screen and all active LED indicators are effected while adjusting this setting.
BUTTONS SETTINGS
Use the Brightness But-
ton to access the LED
brightness options and
move between options.
Press once
Level 2
(Default)
Use the Brightness Button to move
between menu options and the Enter
Button to accept the setting and return to
the home display screen.
Press 2x
Level 3
Press 3x
Level 4
Press 4x
Level 1
NOTE: User default settings can be changed for specific patient environments.