User's Manual

Rad-87 Pulse CO-Oximeter Operator’s Manual

4-33

Operation

Setup Menu Level 3, continued

SmartTone On/Off

The SmartTone feature uses a proprietary algorithm that will provide pulse tones during excessive

motion and low perfusion conditions. The pulse tone is based on an averaged pulse rate

measurement from the proprietary algorithm and may not identify irregular heart beat patterns

when there is excessive artifact present. The Normal Tone feature uses a proprietary algorithm

that will provide pulse tones during non motion and adequate perfusion conditions. In this mode,

the pulse tone may not sound if excessive artifact is present.

BUTTONS SETTING

Press the

Enter Button

again to move

to the next

menu.

Off

(Default)

(Normal Tone)

Use Up or Down Button to move between settings

AND

press the Enter Button to accept the setting and

move to the next menu.

press the Display Button to exit without saving

the new setting and to return to the home display

screen.

(Smart Tone)

Year

BUTTONS SETTING

Press the Enter

Button again

to move to the

next menu.