Product Diagram

How to use MicroSD mode (i.e playing music from an SD card)

Plug your MicroSD card into the designated slot (TF Slot) (13). Once in-

serted, press the Mode button (6) to switch to SD mode and then press

the Play button (4) to begin playing your music. Press the Next (5) or

Back button (3) to change tracks. Press the Play button again to pause

a track.

Note: The Mode button (6) will only cycle through to SD mode if an SD

chip is inserted.

If USB or AUX are also connected, the machine may cycle through

these as well upon pressing the mode button. Press the Mode button

multiple time

s to cycle through all available modes.

How to use AUX mode

Playing music *from* an AUX-compatible device (TV, Phone, Tablet, or

MP3 player):

When the machine is on, plug an AUX cable into the AUX port (8) on

the machine’s function board to activate AUX mode. Then, plug the

other end of the adapter into the designated output on your device.

Once connected, press the Mode (6) button to switch to AUX mode.

Use the controls on your AUX-compatible device to play, pause, and

switch between tracks. The machine’s Play (4) , Back (3) and Next (5)

buttons will not function in AUX mode.

Note: The Mode button will only cycle through to AUX mode if the AUX

cable is connected.

If USB or MicroSD are also connected, the machine may cycle

through these as well upon pressing the Mode button. Press the

Mode button multiple times to cycle through all available modes.

Caution: Do not turn your external device volume to maximum or

damage to speakers may occur. Place your device volume at mi-

drange and then adjust the volume using the volume control on the

C10 machine.

[Detailed Usage Guide]