User Manual

24 25
]Detailed usage guide[
]Detailed usage guide[
How to use SD mode
Playing music from an SD card
Plug your MicroSD card into the TF slot on the machine. Playback
will begin immediately. Use operation instructions in the “Music”
subsection below to adjust settings.
How to use AUX Mode
To use AUX mode, plug the AUX or AUX-RCA cable into the AUX
input on the machine and plug the other end into the AUX input
on your device. Next, press the Mode button on the machine until
LINE appears on the display screen, indicating that you are now
in AUX mode.
How to use USB Mode
To use the USB port, plug a USB stick into the designated slot on
the top of the machine. Your music will begin playing automatically.
How to connect to FM mode
Playing music from an FM radio station
Click the Mode control button on the function board of the
machine until FM appears on the display screen.
Once the FM mode has been activated, press and hold the
for
the machine to begin seeking and storing all of your local radio
station channels.
After the scanning is complete, switch through the channels by
clicking
or to select the radio station of your choice.
How to use multiple playback modes
To use playback modes interchangeably, simply activate each
mode according to the instructions above, then click the Mode
button to switch between the inputs.
How to customize your music
To adjust the machine’s music volume, rotate the main Volume
knob.
To adjust the bass and treble levels of the music, rotate the knobs
that say Bass and Treble accordingly.
To adjust the microphone volume, rotate the MIC.VOL knob.
To adjust the microphone’s echo level, rotate the Echo knob.
To skip back or forward in your song list, press the
and
buttons as needed.
How to connect a guitar to the machine
Plug a guitar cable into the GT IN (Guitar Input) jack on the
machine and into the guitar.
To adjust the guitar’s volume on the machine’s speakers, simply
rotate the GT.VOL (Guitar Volume) knob to set it to your desired
volume level.
Maintenance
How to clean
Turn the machine and microphones o and unplug from the wall
and from the machine speaker.
Gently wipe the outside of the machine using a clean, dry cloth.
Keep all vents, buttons, and openings free of lint and dirt. Do not
immerse the machine in water and do not use any harsh cleaners.
How to store
Charge the machine and microphones so that they are ready for
next use.
Make sure that the machine is clean and dry. Bind the unplugged
cord gently with an electrician-approved fastener. Do not wrap
the cord around the machine.
Store the machine in a cool, dry place away from damaging
elements.
For best results, clean and store the machine after each use.
Please refer to Section 3 for detailed instructions on how to
disassemble and reassemble the machine properly for storage.