User Manual

16 17
]Machine assembly[
]Machine assembly[
Disassembly & Transport
• To disassemble the machine, remove all detachable components
(e.g. disco ball, device holder, microphone stand) and place them in
a suitable bag.
• Using the shoulder straps provided, clip both ends to the sides of the
main machine where there are bands to clip the strap into.
• The main machine can now easily be carried with the shoulder strap.
All detachable components should be carried separately.
4.
Plug in the DC5V/2A cable
(power plug)
6
to its port
on the machine and feed
the wire through the large
and small wire clips
7
that
can be attached to the
microphone pole.
The larger clip should be
attached to the wider pole
and the smaller clip should
be attached to the narrower
pole of the microphone
stand.
5.
The wire should neatly climb
up the microphone pole and
connect to the disco ball.