User's Manual

12
Microphones
How to set up the microphones
Unscrew the bottom half of the microphone (note: not at the
colored cap, but at the seam halfway up the handle). Install two
AA batteries. Replace the bottom of the microphone and rotate it
gently until secure.
How to turn the microphones on
Turn the microphones on by sliding the power buttons upward into
the “ON” position. They will automatically pair with the machine.
Once paired, the mic indicator light on the machine will be lit.
How to customize your microphone vocal mix
To adjust the volume of your singing over the music, turn the
Mic+ knob to the left or the right until desired volume balance is
achieved. Turn the -Echo+ knob to the right or left to experiment
with reverb eects.
How to Store the Microphones
To store the microphones for easy transport, slide each mic into
a leather loop at the sides, making sure the end you sing into
is facing up. You may also unsnap the buttons, wrap a leather
loop around each mic, then secure them by snapping the buttons
again.
To connect your own wired microphones
The Ostinato M7 is also compatible with wired microphones. Simply
plug one or two 6.5mm microphones into the corresponding ports
on the back of the machine. You may connect both wired and
wireless microphones simultaneously.