User's Manual

14 15
How to connect to a TV
Plug the AXU-RCA cable into the AUX input on the machine’s
function board to activate AUX mode in order to connect a TV.
Insert the other end into the designated port on your TV and play
your music just as you would in regular AUX mode.
How to start USB mode
Playing music from a USB drive
Plug your USB into the USB Port on the machine’s function board.
The stored music on your USB will begin playing automatically.
How to connect to FM mode
Playing music from an FM radio station
Click the Mode button on the function board of the machine until
“FM” appears on the display screen.
Once the FM mode has been activated, press and hold the
button on either the remote control or function board for the
machine to begin seeking and storing all of your local radio station
channels.
After the scanning is complete, you can browse your saved
channels by pressing SCAN on the remote control or simply
switching through the channels by clicking
or on either the
remote control or function board to select the radio station of your
choice..
How to use PA mode
When there is no music playing, this machine will automatically
start PA Mode. Simply use the microphones by ensuring that they
are turned on. Adjust the microphone’s volume and echo on the
machine’s function board or the microphone itself.
How to record
Begin by inserting a suitable recording device into the function
board via the MicroSD slot or USB port. Ensure that the microphone
is turned on and then proceed to press REC on the function board.
Speak or sing into the microphone and when finished recording,
click REC again to stop it.
To listen to the recorded audio, remove and then reinsert the USB
or MicroSD recording device. The recording will begin playing
automatically.
How to use multiple playback modes
To use playback modes interchangeably, simply activate each
mode according to the instructions above, then click Mode to
switch between the inputs.