User's Manual

How to use AUX mode

(i.e. Playing music *from* an AUX-compatible device such as

phone or MP3 player)

When the microphone is on, plug the MicroUSB side of the AUX-

to-MicroUSB adaptor into MicroUSB port (16) on the H11. Plug the

AUX end into the device with which you wish to play music from.

Once connected, press the Mode (8) button to switch to AUX

mode. Use the controls on your AUX-compatible device to play,

pause, and switch between tracks.

Note: The Mode button will only cycle through to AUX mode if

the AUX cable is connected.

If USB or MicroSD are also connected, the microphone may cycle

through these as well upon pressing the Mode button. Press the

Mode button multiple times to cycle through all available modes.

How to start USB mode

Playing music from a USB drive.

Plug a USB drive into a USB port (17). Once connected, press the

Mode button to switch to USB mode. Press the Play (10) button to

begin playing your music. Press the Next (11) or Back (12) button to

change tracks. Press the Play button again to pause the track.

Note: The Mode button will only cycle through to USB mode if a

USB storage drive is connected.

If AUX and MicroSD are also connected, the microphone may

cycle through these as well upon pressing the Mode button.

Press the Mode button multiple times to cycle through all avail-

able modes.

How to use multiple playback modes

To use playback modes interchangeably, simply activate each

mode according to the instructions above, then press Mode (8)

to switch between the inputs.

[Detailed Usage Guide]