Installation Guide

3/4" (19 mm)
1/4"
(6.3 mm)
3/8"
(10 mm)
Center to stile
or minimum
of 2" (51 mm)
2"
(51 mm)
3/4" (19 mm)
1/4"
(6.3 mm)
3/8"
(10 mm)
Center to stile
or minimum
of 2" (51 mm)
2"
(51 mm)
1
DOOR
PREPARATION
The barn door is supplied pre-mortise 1/4" wide x
3/4" deep groove centrally to the bottom of the door
for use with the floor-mounted door guide. This will
ensure smoothness of door travel side-to-side and
will prevent the door from swinging in and out.
Note: optional wall- and floor-mounted door guides
have also been provided in this kit should you not
wish to use the floor-mounted door guide.
2
DOOR PREPARATION
STRAP INSTALLATION
The Barn Door is supplied with holes pre-drilled
to install both of the straps securely.
IMPORTANT: For 1-3/8" Doors, please use
the shorter standard bolts provided.
For 1-3/4" Doors, please use the longer
additional bolts provided.
3
DOOR PREPARATION - ANTI-JUMP
BLOCK INSTALLATION
Position each anti-jump block at least 1" from the
edge of the Straps. Tighten slightly to secure in place.
Barn Door Installation Guide
BARN DOOR HARDWARE STRAIGHT STRAP KIT
©2017 Masonite International Corporation. MIC-171901 1-800-663-DOOR masonite.com
3/4" (19 mm)
1/4"
(6.3 mm)
3/8"
(10 mm)
Center to stile
or minimum
of 2" (51 mm)
2"
(51 mm)