Interior Doors Catalog

34 35
Backset
2-E
2-D
2-A
2-G
2-C
2-F
2-B
Door (Fig. 1)
A. Measure widest side of your existing door (1-A).
B. Measure door height (1-B).
Un-Machined Door (Fig. 1):
Finished (Or Cased) Opening
(Fig. 4)
If you have an opening in the wall that already has the
casing and the door frame in place (also applies to
openings that have finished drywall):
A. Measure the width in three dierent areas of
the finished opening (4-A) and write down
the smallest of the three measurements.
B. Measure the height in three dierent areas
of the finished opening (4-B) and write down
the smallest of the three measurements.
Bifold (Fig. 4):
Rough Opening (Fig. 3)
A. Measure widest side of your existing door (2-A).
B. Measure door height (2-B).
C. Measure from top of door to top of first hinge (2-C).
D. Measure from top of door to top of middle hinge (2-D).
E. Measure from top of door to top of bottom hinge (2-E).
F. Measure from top of door to center of lock hole (2-F).
G. Measure from edge of door to center of lock hole (2-G).
Pre-Machined Door (Fig. 2): (Fig. 2)
Measure the width of your existing door jamb.
Measure the existing rough opening:
A. To ensure accurate measurements, first remove
the casing on the sides and top of your opening
frame.
B. Measure from inside the face and of one stud to
inside the face of the other stud (3-A).
C. Measure from the floor to the bottom of the
header above the door (3-B).
D. Indicate door swing L/H or R/H.
Prehung Door (Fig. 3):
Left
Hand
Right
Hand
Eco-Friendly
Engineered Doors
EMERALD “GREEN” DOORS
How To Measure
 This product contributes to satisfying the credits of the U.S. Green Building
Council’s LEED
®
Green Building Rating System
™
. For current applicable LEED
®
standards, visit www.usgbc.org.
 Evaluations of the Green Certifications are provided as a courtesy for Masonite
customers, further confirmation should be completed on a project basis by
consulting the certification guidelines or contacting an association
representative for verification.
 USGBC
®
and LEED
®
are registered trademarks of the U.S. Green Building Council.
TECHNICAL & SUPPORT INFORMATION ON GREEN.
Note: Not all designs are available in Emerald oering, contact
Masonite for the complete product oering.
The above referenced certifications are based on the following versions:
LEED NC - 3.0 / LEED H - 2008 / LEED V4-2015.
For technical specification information, visit www.masonite.com or
contact us at 800-663-DOOR (3667).
Leed V4 Assessment For “Green Association & Certification Cross Reference”
Building product disclosure and
optimization - sourcing of raw
materials
LEED V3 CREDIT LEED V4 CREDIT SAFE & SOUND EMERALD HOLLOW CORE EMERALD
Molded Panel Flush Primed Hardboard Molded Panel Flush Primed Hardboard
Home
MR 2.1 Certified Wood Environmentally preferable
MR 2.2 Recycled Content products
• • • •
Low-emitting products • • •
New Construction
MR 4.1 & MR 4.2 Recycled Content
MR 6.0 Rapidly Renewable • • • •
MR 7.0 Certified Wood
IEQ 4.4 NAUF Low-emitting materials • • • •
Acoustic performance • •
HOW TO MEASURE | ECO-FRIENDLY DOORS
masonite.com
LWS-18-INT-2018-Catalog-P5.indd 34-35 5/1/18 8:57 AM