Operating instructions

Masport F33-1 Freestanding Gas Stove 17
MAINTENANCE
10) Loosen four (4) phillips head M5 valve mounting screws
from underside of firebox. Push valve assembly forward on
the teardrop slots and drop down.
11) Disconnect Piezo wire.
To remove valve from valve assembly, continue.
12) Remove two (2) thermopile wires.
13) Remove thermocouple with a 9 mm (metric) spanner.
INSTALLING VALVE ASSEMBLY
14) Remove pilot nut with an 11 mm spanner.
15) Remove valve to orifice nut with a 13/16" spanner.
16) Remove inlet pipe with pipe spanner. Note orientation of 90
o
elbow.
17) Remove two (2) phillips head M5 screws on each side of
the valve.
18) Remove valve and remove gas out 90
o
brass fitting. Note
orientation of fitting.
1) To install a new valve assembly, reverse instructions for remov-
ing valve. See assembly steps 1-11.
2) Check for leaks and manifold pressure. See Gas Pressure Test
instructions.
3) To reinstall valve, reverse instructions for removing valve assem-
bly, steps 12-18.