Operating instructions

Masport I31-3 Gas Inbuilt

11)Mount the cast faceplate panels onto the insert body, sliding the

side filler brackets into the space between the glass and the

firebox. Secure using the 4 remaining black screws, 2 per side.

12)Install the glass trim by inserting the side hooks on the glass trim

into the 4 slots between the faceplate and the glass. Push the glass

trim down firmly with both hands to lock into place.

Slide side filler

bracket into gap

between glass and

fire box.

Side Hook

Slots

CAST FACEPLATE

GRILL INSTALLATION

1) Install logs and flush glass before going on to the next step. See

manual for details.

3) The top louver, shown in diagram 1, is held in place by friction fit,

if the louver needs to be adjusted; bend the convex bracket out

as shown in diagram 2.

4) The bottom louver has 2 hinges that are attached

(2 screws per hinge) to the lip on bottom of the unit.

2) Before the grills are inserted onto the firebox,the U31 grill stop

bracket needs to be inserted in the bottom left corner just under

the firebox with the screw supplied.

Note: The top and bottom grills and brackets are different.

U31 Grill

Stop

Bracket

INSTALLATION

Note: The top louver should be placed with the

curved cut-out facing up.

Diagram 1

Diagram 2

Diagram 3

13) To put on the Regency logo, peel the sticker from the back of the

logo and place it centered on the bottom left hand corner of the

faceplate.

Regency Logo

Left Hand

Side Faceplate