Operating instructions

PROBLEM POSSIBLECAUSE(S) SOLUTION
Smellofgasintheroom. Pipefittingsmaybeleaking. Checkalljointsforleaks,
includingthegassupplysystem,
thepilotlightsupplytube,the
mainburnersupplytubeandall
connectionstothecontrolvalve.
UseONLYaproperleakcheck
solution.NEVERUSEAN
OPENFLAMETOCHECK
FORLEAKS.
Athincoatingofblacksoot
formsinsidetheglass.
Combustionairsupplyrestricted. Cleanallprimaryandsecondary
airpassageways.
Over-supplyofgas. Adjustgasdeliverypressureat
testpoint.
Logsoutofposition. Arrangelogscorrectly.
Awhitecoatingformsinside
theglass.
Residuesofnewlogsbeing
burnedoff.
Followglasscleaningdirections
underMaintenanceInstructions.
Fanhumsbutthereispoorair
circulation.
Dirtyfanimpeller. Disconnectelectricalpower.
Removefanandcleanimpeller.
Fanwillnotrun.
Nopowertofan.
FaultyThermodiscorwiring.
Loosefanloomplug.
HandpieceforECSmodel
ineffective
Fanshouldnotrununtilfireboxis
hot.
Callserviceman.
Checkafterremovingfan.
Aimatreceiver.–fitnew
batteries.
Firecyclingonandofftoo
rapidly.
Thermostatmodelsonly.
Alargefireinasmallroom.
Incorrectpositioningof
thermostat.
Turnflamedowntoalower
setting.
Movehandthermostatorwall
thermostatfurtherawayfrom
heaterhotairstream.
15