Service manual

G.Fire Service Manual 7 Issue A — © Masport, March 2004

YES

Is the gas pressure low

after the regulator?

Adjust the pressure

and re-test

Are the logs

correctly positioned?

Re-arrange logs

correctly and re-test

Are the main burner jets

the correct sizes?

Fit correct jets

and re-test

Is a jet blocked?

Clean the jet

and re-test

See Drawing No 4

See Table No 3

FIRST :-

• For an LPG heater, check that there is ample gas in the bottle.

• For a Thermostat heater, verify that the sensor is not warmer than

the temperature set-point.

YES

— STD HEATERS, PILOT ALIGHT BUT BURNER

WILL NOT LIGHT WITHIN TEN SECONDS