Barbecues MASPORT 4/6 BURNER 210 SERIES OWNER’S MANUAL Please read these instructions carefully before assembly, to reduce risk of fire, burn hazard or other injury. Keep these instructions in a safe place for future use. This manual covers the Masport BBQ 210 Series as listed: Graphite 210, Elite Plus 210, Supreme 210, Supreme Plus 210, Supreme 210 W, Supreme Plus 210 RB/W, Deluxe Plus 210, Deluxe Plus 210 RB, Super Grande 210, Super Grande 210 RB & Super Grande 210 RB/W barbecues. www.masport.
Keep the instructions in a safe place for future use. Contents Safety and warranty Information 2-3 Parts 4-6 Assembly instructions 7-13 Location Information 14 Leak Testing 15 Lighting Instructions (Operation) 15-16 Rear Burner, Timer Care and Maintenance 17-19 Technical Data 20-21 Troubleshooting 22 Optional Extras 23 Do not operate this BBQ before it has been assembled correctly and you have read and understood these instructions.
Clear the area to allow the unburned gas to dissipate. Be aware of the reason for the gas smell, address this before continuing. Should the gas odour come from the LPG cylinder, immediately contact the fire department from an elevated safe distance. Connecting the gas cylinder to the barbecue, refer to that section in the manual. Leak testing, refer to that section in the manual. Safety Equipment When cooking with oil/grease, fire extinguishing materials should be readily accessible.
Parts List 1. Base tray × 1pce 2. Front skirt x 1pce 3. Left skirt x 1pce 4. Right skirt x 1pce 5. Castor × 4pcs 6. Left panel × 1pce 7. Right panel x 1pce 8. Back panel × 1pce 9. Transom × 1pce 10. Left door x 1pce 11. Right door x 1pce 12. Handle bracket × 4pcs 13. Door handle × 2pcs 14. Hood and Body Assembly x 1pce 15. Knob x 6 or 8 pcs 16. Side shelf × 1pce (Timer Shown) 17. Side burner assembly × 1pce 18. Drip tray × 1pce 19. Grease cup × 1pce 20.
Parts List (cont.) 21. Cook grill × 1pce 22. Cook plate × 1pce 23. Warming rack × 1pce 24. Prong × 2pcs 25. Rod-A × 1pce 26. Rod-B × 1pce 27. Guide × 1pce 28. Rotisserie Handle x 1pce 29. Motor Holder × 1pce 30. Motor × 1pce 31. Battery × 2pcs 32. Counter weight × 1pce 33. Heat Shield 34. Knob - Rear burner 35.
Parts List (cont.) a. Screw M6*12 43pcs b. Screw (SS) M6*12 14pcs c. Big fibre washer 6pcs d. Screw M5*10 2pcs f. Nut M6 4pcs g. Screw (Black) M6*40 2pcs h. Washer 2pcs (Screw (SS) M6*12 - 43pcs for Super Grande 210 & Super Grande RB 210 & Super Grande RB/W BBQs) e.
Assembly Instructions Product Description Carton Identification Product Part Number Open the carton by removing the shipping straps then slitting along both ends. Cut the tape only by a small amount in the middle, finish by lifting the carton flaps with your hand. Unpack the entire carton, this carton will be used as a surface protector as the cabinet is being built.
4. Assemble 1pc Right skirt (4) to the Base tray using 3pcs Screw M6×12 (a) and 1pc Screw M5*10(d) from the fastener kit. Screw M5*10 4 Screw M6*12 5. Assemble 4pcs Castors (5) to the Base tray using 16pcs Screw M6×12 (a) from the fastener kit. 5 Lock this castor Screw M6*12 Locking the rear castors will steady the base. Position the base with the locks facing outwards. Lock this castor 6.
8. Assemble the transom (9) using 4pcs Screw M6×12 (a) from the fastener kit. The top of the hinge should be level with the top of the side panels 9 M6*12 Screw M6*12 9. Assemble Left door (10) and Right door(11) using 4pcs Screw M6×12 (a), 4 Handle brackets (12) and 2 Handles (13), then assemble the door assemblies as the picture.
14 Screw SS M6*12 Big fibre washer 15 11. Loosen the 3 Screws (b), remove the 4th & 5th screws, then assemble the Inner Panel (33) and Side shelf (16) to the appliance with 5pcs Screw (SS) M6*12 (b). Level the top of the table and secure. If the timer knob is not fitted then, fit one knob (15) on the shaft of the timer on the side table. Refer to the timer section for correct operating procedure. 16 (b) 15 Screw SS M6*12 (b) 33 4th & 5th FOR 4 BURNER BBQS ONLY 12.
13. Loosen fully but do not remove 4 screws (b) as shown. Remove two screws 5 & 6, lower the side table over the screw heads. Fasten the four screws to secure the side table. Refit screws 5 & 6, screw 6 secures the facia which may require frontal pressure to align this hole. Level the top of the table and secure. 16 Screw (b) Screw 5 Screw (b) Screw 6 Loosen fully (b) but do not remove. Screw (b) 14. 1) Remove all packaging from the side burner prior to fitting the side table to the BBQ.
16. Open the hood and spark test each burner electrode by pushing inwards and turning anti-clockwise each knob in turn. Reset the knob to the off position after each test. The gap between the tip of the electrode and burner should be between 4 to 5mm. Place the Flame tamer (20) to the positions as in the pictures. 20 20 20 4 BURNER BBQS 6 BURNER BBQS RB BURNER BBQS 17.
For Models With Rotisserie - Assembly Instructions Tools needed for assembly Crosshead screwdriver, 10mm A/F spanner, 2x 8mm A/F Spanners. 18. Assemble the Prong (24), the Rod-A (25), the Rod-B (26) and the Guide (27), the Rotisserie handle (28) together as in the diagram. Note! Rotisserie Rod 26 is threaded LH, assemble by turning rod anti-clockwise. Tighten with 8mm A/F Spanners. This connection must remain spanner tight.
Installation SELECTING A LOCATION This barbecue is for outdoor use only and should be placed in a well-ventilated area.
GAS AND REGULATOR INFORMATION This barbecue is designed for LP gas use only. Bottle sizes of 4.5kg or greater are recommended for use with this barbecue. Suitable LPG regulators must have an outlet pressure of 2.75 kPa. You must have the proper regulator and bottle in order for the barbecue to operate safely and efficiently. Please consult your local gas dealer for the most suitable gas cylinders. Please note the regulator supplied with this barbecue is of an approved type.
SIDE BURNER LIGHTING INSTRUCTIONS USING ELECTRONIC IGNITION (For barbecues with side burners) 1. Turn all knobs to “OFF” then open the LP tank valve. Always keep your face and body as far from the grill as possible when lighting. 2. Raise side burner lid. 3. The valves fitted to this BBQ include a safety feature. The valves must be depressed first before turning anti-clockwise. This feature stops an accidental activation of the knob. 4.
if required. Insert pointed end of rod into the motor, test that everything is running correctly. REAR BURNER LIGHTING INSTRUCTIONS: 1. Turn all knobs to off, then turn the gas bottle valve to open. Always keep your face and body as far away from the grill area as possible. 2. With the hood open, push in and slowly turn the rear burner knob anti-clockwise to the “high” position. This will open the gas flow and at the “high” position, manually activate the ignition (located on the RH Side Table).
Do lower the burners directly under the stone, this will allow the pizza to cook more evenly. Do check after 10 minutes by raising the hood slightly, be aware of a possible heat rush coming from within as you lift the hood. Do not remove the pizza stone from the BBQ with oven mitts directly after cooking. The pizza stone reaches a very high temperature, wait for the pizza stone to cool naturally. Do lightly oil the pizza stone after each cooking session.
water and a dry wipe will complete the process and eliminate the possibility of water stains. Household Cleaners Household cleaners fall into two categories: detergent (nonabrasive) and abrasive cleaners. Abrasive cleaners are more effective but introduce the possibility of scratching the surface. A neutral cleaner low in chloride is essential.
Technical Data Name Model AGA Approval SUPREME PLUS 210 BG6286BS-WS-RRB AGA 7693G RB/W DELUXE PLUS 210 RB BG6286BS-S-RB SUPER GRANDE 210 BG6286BS-S-RRB RB AGA 7693G AGA 7693G SUPER GRANDE 210 BG6286BS-WS-RRB AGA 7693G RB/W Injector Pressure Inp/Burn Total (mm) (kPa) (Mj/h) (Mj/h) BBQ 0.83 ULPG: S/B 0.92 R/B 0.90 BBQ 1.38 NG: S/B 1.6 R/B 1.52 BBQ 0.83 ULPG: S/B 0.92 R/B 0.90 BBQ 1.38 NG: S/B 1.6 R/B 1.52 BBQ 0.83 ULPG: S/B 0.92 R/B 0.90 BBQ 1.38 NG: S/B 1.6 R/B 1.52 BBQ 0.83 ULPG: S/B 0.92 R/B 0.
Technical Data Name Model AGA Approval ELITE 210 BG6284BE-S AGA 7693G GRAPHITE 210 BG6284BS-S AGA 7693G ELITE GRANDE 210 BG6284BS-S-R AGA 7693G ELITE PLUS 210 BG6284BS-S-R AGA 7693G SUPREME 210 BG6286BE-S-R AGA 7693G SUPREME PLUS 210 BG6286BS-S-R AGA 7693G SUPREME PLUS 210 W BG6286BS-WS-R AGA 7693G DELUXE PLUS 210 BG6286BS-S AGA 7693G SUPER GRANDE 210 BG6286BS-S-R AGA 7693G Injector (mm) ULPG: NG: ULPG: NG: ULPG: NG: ULPG: NG: ULPG: NG: ULPG: NG: ULPG: NG: ULPG: NG: ULPG: NG:
Troubleshooting Spider and Insect warning! Spiders and insects can nest in the burners of the grill and cause the gas to flow from the front of the burner. This is a very dangerous condition, which can cause a fire to occur, thereby damaging the grill and making it unsafe to operate. When to look for spiders You should inspect the burners at least once a year or immediately after any of the following conditions occur: 1. The smell of gas in conjunction with the burner flames appearing yellow. 2.
OPTIONAL EXTRAS 552772 Interchangeable Cooking System Includes the following items: 555231 - Kebab Rack (each) x2 559760 - Grill (390 x 485) x1 559761 - Kebab Skewers x8 559762 - Pizza Stone x1 559766 - Grill-Insert, Round x1 559767 - Plate-Insert, Round x1 559768 - Handle-Grill Insert x1 559765 Grill - Matt P/E 390 x 485 with kebab option 555231 Kebab Rack (each) 559761 Kebab Skewer (each) 559218 Rotisserie Set 210 Includes the following items: 556297 - Prongs x2 559223 - Rod-550 x1 559224 - Rod-400 (Ha
Head Office - New Zealand 1-37 Mt Wellington Highway. Panmure, P.O.