Calibration & Industrial Range of Temperature Products
Contents i 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Introduction of Techne Calibration Range Tecal Series of Portable Dri-Block® Temperature Calibrators UCal 400+ Tecal 140F & 425F Tecal 650F Tecal 140H Tecal 425H & 650H Tecal and UCal 400 Inserts Tecal 700X Tecal 1200S TechneWorks software CH-5 Chiller Unit Liquid Temperature Baths Liquid Temperature Baths Introduction Unheated Baths Thermoregulators Thermoregulators Dip and Flow Coolers RB-5
Introducing the Calibration Range... Dri-Block Temperature Calibrators The Tecal Series of Dri-Block Calibrators are used as portable temperature calibrators in a wide variety of industries for checking the calibration of thermocouples, RTDs and liquid filled sensors.
Tecal Portable Dri-Block® Calibrators 1
tecal portable dri-block® calibrators UCal 400+ Portable Dri-Block Calibrator Calibrate your temperature sensors and systems with our economically priced portable unit! Key Features - Wide temperature range - Built in program for thermal switch testing - Maximum temperature of 430°C/806°F - Fast heat up and cool down - 10 insert formats available - Independent over-temperature protection - Only 9 lbs with included multi-well insert and NIST cert The UCAL400+ Calibrator provides a safe, dry and constant temp
tecal tecalportable portabledri-block dri-block®®calibrators calibrators Tecal “Field” Range of Dri-Block Calibrators Techne has developed a range of lightweight dry-block thermal calibrators that operate from 45°C below ambient up to 650°C, for convenient field use. The three models in the Tecal F range incorporate the precision control system used on Techne’s Tecal ‘H’ models to provide excellent reliability and accuracy, with a number of improvements such as an enhanced display resolution of 0.
tecal tecalportable portabledri-block dri-block®®calibrators calibrators Tecal 650F Technical Specifications High temperature Portable Field Temperature Calibrator Minimum temperature Maximum temperature Temperature accuracy Temperature uniformity Temperature stability Display resolution Set point resolution Heating rate, 20°C to 600°C Cooling rate, 600°C to 200°C Large well Fan cooling Dimensions (W x D x H) Weight 25°C above ambient 650°C ±0.4°C ±1°C ±0.09°C (after 10 mins) 0.01°C or 0.1°F 0.1°C or 0.
tecal portable portable dri-block dri-block®® calibrators calibrators tecal Tecal H Range Dri-Block Calibrator This range of temperature calibrators is ideal for advanced temperature calibration work where programmability, switch testing and ramp/dwell functionality from the unit’s display and user interface are required. Each Tecal H model is shipped with one insert, soft-sided carrying case, calibration certificate and TechneWorks software with cable.
tecal tecalportable portabledri-block dri-block® ®calibrators calibrators Tecal 425H These calibrators use large aluminum heater blocks to give fast heating and cooling rates which provide high accuracy, uniformity and stability up to 425°C.
tecal portable dri-block® calibrators Ordering Information Tecal 140F / 140H / 425F / 425H / UCal 400+ Inserts (4.
tecal portable dri-block® calibrators Tecal 700X Precision Dri-Block Temperature Calibrator The Tecal 700X offers precise temperature control stability up to 700°C. This unit gives market leading stability and accuracies up to and above the melting point of Aluminum at 660°C. For optimum performance, you can count on Techne thermal solutions.
tecal tecalportable portabledri-block dri-block®®calibrators calibrators Tecal 1200S High Temperature Portable Calibration Furnace Calibrate with confidence with the Tecal 1200S High Temperature Portable Calibration Furnace! When precise temperature control is essential for optimum performance, you can count on Techne thermal solutions.
tecal portable dri-block®® calibrators TechneWorks TechneWorks is an easy to use control software for many of our RS-232 compatible products. This software has been designed to supersede the existing Calsoft and Thermsoft software packages. It will allow customers to carry out all the tasks previously available on Calsoft and Thermsoft, plus many new options on one new package.
tecal portable dri-block® calibrators temperature measurement products The CH-5 Chiller Unit The CH-5 Chiller Unit is designed for use in conjunction with the TECAL 140H Calibrator to achieve calibration temperatures down to -40°C. Chilled water pumped through the heatsinks on the Tecal 140 units allow the Tecal to reach -40°C.
Liquid Temperature Baths 12
liquid temperature baths calibration baths Water Baths A comprehensive range of general purpose water baths are available from Techne. Twenty different water bath combinations allow the use of accurate temperatures from -40°C up to 200°C; ensuring a solution for most laboratory applications. (See page 19 for our High Performance Liquid Calibration Baths).
liquid temperature calibration baths Unheated Baths Designed to be used with a clip-on Tempette or Tempunit thermoregulator, these baths are equipped with carrying handles for added safety. All baths have stoved enameled steel outer cases and are supplied with bridge mounting plate to hold the thermoregulator. Polypropylene spheres can be used to create a ball blanket so as to reduce evaporation and heat loss, while providing instant access to the bath.
thermoregulators liquid temperature calibration baths Techne® invented the ”Clip On” thermoregulator in 1948 and now offers four “Clip On” units. Thermoregulators are designed to be used with the Techne® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits.
liquid temperaturethermoregulators calibration baths TU-20D Tempunit® - A wider temperature range of -40°C* to 200°C - Excellent temperature stability: ±0.005°C at 40°C - 4 digit setting with a bright LED digital temperature display - This unit incorporates an RS232 connection - User adjustable over-temperature cut-out - Low liquid level cut-out as standard TU-20HT Tempunit® - This sophisticated Tempunit® covers a wide temperature range of -40°C* to 250°C - Excellent temperature stability: ±0.
liquid temperature calibration baths Dip and Flow Coolers Techne Dip and Flow Coolers work in conjunction with a Techne thermoregulator (see pages 15 and 16). The bath liquid flows through the Flow Coolers, which continually extracts heat from the bath fluid by means of the heat exchanger. The cooling head of the Techne Dip Cooler fits neatly and unobtrusively into the corner of the bath and can be secured with a specially designed mounting bracket (supplied).
liquid temperature calibration baths Model RB-5A Refrigerated Bath The RB-5A is a complete refrigerated circulating system for open or closed applications for temperature ranges from -20°C to 100°C. It is supplied with a lid and bridging plate and has a bath capacity of 7 liters. - Circulating bath with built in refrigeration - By combining the RB-5A with one of our thermoregulators, four different choices are available to match your specifications and budget.
Precision Calibration Baths The Techne liquid calibration bath (LCB) series offer compact, accurate and reliable liquid baths for temperature calibration of thermal sensors. -35°C to 250°C - Two different capacities available: 7 or 12 liters - Temperature stability; ±0.
RCB-80 Ultra Low Temperature Liquid Bath The RCB-80 is a mechanically-refrigerated bench top circulating bath that provides precise temperature control for a wide variety of applications and eliminates the cost and potential hazards associated with using dry ice or liquid nitrogen. It offers a 4 liter bath capacity with an ultimate low temperature of -80°C. A built in magnetic stirrer, with variable speed control, provides excellent temperature uniformity and stability.
liquid temperature calibration baths Heat Transfer Fluids Benefits and features - Low viscosity - Improves bath uniformity and stability - Enhanced heat-up and cool down rates - Lower cost than glycol and silicone oil type fluids - Safe and non-toxic - Convenient 18 liter (5 US gallon) containers High Temperature Heat Transfer Fluid This high temperature fluid offers industry a practically non-toxic, versatile bath fluid that has proven to be cost effective and thermally stable at temperatures up to +315ºC
Fluidized Temperature Baths 22
fluidized temperature baths Fluidized Sand Baths Overspill flange Outer case Fluidized sand Inner container With more than 50 years of experience in the field of temperature control, Techne has established itself as a world leader in the design and manufacture of equipment used for both laboratory and on-site temperature calibration, providing the calibration engineer with a precise dynamic stable temperature source.
fluidized temperature baths Laboratory Range SBS-4 This compact fluidized bath has a working depth of 14cm, with a 17.7cm diameter. It’s wide operating range of 50 to 600°C makes it a popular choice for a variety of heat source applications. SBL-2D This extra depth fluidized bath has an increased working depth of 35cm, as well as a larger diameter. Four 1kW heaters give a heat up time from ambient to 600°C of approximately 100 minutes.
precision fluidized baths FB-08 Range The FB-08 Series are precision fluidized baths, with exceptional temperature stability and uniformity, which make them the ideal choice for critical temperature sensor calibration and heat treatment processes. Models FB-08 and FB-08C Fluidized (Sand) Baths have become the market standard for carrying out shape setting (heat treatment processing) of metals including Nitinol and platinum for medical device manufacturing.
precision temperature precision fluidized fluidised baths sand baths FB-08 The standard FB-08 offers a wide operating range of 50 to 700°C (122-1292°F), PID temperature control and a built-in dust extraction and collection system. Fluidizing air is manually controlled in the standard FB-08, whereby the FB-08C includes automatic fluidizing air control and RS232 interface for remote user control via a PC.
fluidized temperature baths Accessories for Fluidized Baths Air Pressure Regulator Air Pressure Regulator/Filter (all baths) Used in conjunction with air from a factory airline to regulate the supply pressure and quality of air to the fluidized bed. The unit removes oil and moisture from the supply air and is fitted with an automatic drain system.
Temperature Measurement 28 28
temperature measurement 4500 High Accuracy Smart Probe Thermometer Model 4500 Series Ultra-High Accuracy Thermometers take metrology-level temperature measurement to the laboratory, the production floor and the field. Ultra-high system accuracy (±0.015°C) is achieved because the thermometer and probe function as if they were calibrated together as a system, even though they can be purchased separately.
temperature temperature measurement measurement products Accu-Temp Precision RTD Thermometer The Tecal Accu-Temp RTD thermometer is an excellent choice for use as a laboratory grade reference thermometer. It offers the flexibility of one or two RTD input channels, along with direct temperature readout in degrees °F, °C and ohms. Combine the Tecal Accu-Temp with one of our PRT’s for a high accuracy temperature measurement system. - User programmable linearization (ITS90) - Accepts either 10, 25.
temperature measurement Tecal Accu-Temp II Laboratory Grade Reference Thermometer The Tecal Accu-Temp II is a high accuracy multi purpose digital thermometer for both platinum resistance thermometers and thermocouples. Dual Channel input allows a probe on Channel B to be calibrated against a standard on Channel A - directly compare any combination of PRT and Thermocouple.
temperature temperature measurement measurement products Technical Specifications Display LCD Graphics Panel, 240 x 64 Dot, with LED backlight contrast control via Keyboard. Inputs Thermocouples via 4mm sockets in copper block on 19mm pitch adaptor plug for direct connection of thermocouple wire. Reference Junction Compensation - Automatic with external Pt100 probe. PRT’s via 6-pin Lemo socket, also used for external RJ measurement. Calibration Digital, security code protected.
temperature temperature measurement measurement products RTD Probes The Techne model WSP425 and SSP660 PRTs are an excellent choice for use as reference sensors in all types of systems, including dry block calibrators, liquid calibration baths, ovens, reactors and other applications where temperature needs to be accurately measured. Our PRTs offer proven and reliable performance for critical temperature measurements. They can be used with our Tecal Accu-Temp indicator or any comparable unit.
temperature measurement 660ºC Secondary Standard PRT Model SSP660 PRTs are assembled using our special wire wound RTD elements and assembled into inconel sheaths. The SSP660 PRT has the accuracy and long-term stability specifications you would find in much higher priced secondary standard PRTs.
Industrial Fluidized Baths 28 35
industrial fluidized baths About After years of demonstrated success, plastic manufacturers have come to depend on Techne fluidized baths for safe, efficient and cost effective cleaning of tooling, components, systems and parts (dies, breaker plates, nozzles, tools, tips, spinnerets, extruder screws, manifolds, etc.
industrial fluidized baths Technical Specifications IFB-51 IFB-52 Temperature range Overall size (H x W x D), in. Working volume (diam. x depth*) Working size with basket (diam. x depth*) Maximum work load (lbs) Heat up time (20°C to 600°C, 230V) min Cool down time (600°C to 200°C) min. Display accuracy ** Typical stability ** Air requirements, PSI fixed at Aluminum oxide required (lb.) Aluminum oxide supplied (lb.
industrial fluidized baths AB100 Afterburner Model AB100 is designed to reduce smoke emission from the exhaust gas flue of most all Techne fluidized bath cleaning systems. The Afterburner consists of a burner plate mounted within a thermally insulated combustion chamber. The input to the combustion chamber is designed to mate directly to a standard Techne extraction fan, while the output is suitable for connection to an exhaust stack. The AB100 will not remove hydrogen chloride from exhaust gases.
Techne Incorporated 3 Terri Lane Suite 10 Burlington, NJ 08016 USA Tel: 609-589-2560 Toll free: 800-225-9243 Fax: 609-589-2571 www.techneusa.