Specifications

liquid temperature calibration baths

Water Baths

A comprehensive range of general purpose water baths are available from Techne. Twenty di erent

water bath combinations allow the use of accurate temperatures from -40°C up to 200°C; ensuring a

solution for most laboratory applications. (See page 19 for our High Performance Liquid Calibration

Baths).

First select the unheated stainless steel bath (see page 14) which has the appropriate volume for the

application, for example B-26 which has a volume of 26 liters.

Then add a thermoregulator (see page 15-16) suitable for the required temperature range, for ex-

ample the TE-10D Tempette is a digital thermoregulator for temperatures between -40°C and 120°C.

Select any accessories that are required, for example, both gabled and  at lids are available for all

bath sizes. Gabled lids particularly allow tall tubes to be accommodated.

If sub-ambient temperatures are required it is necessary to add a cooling mechanism to the bath.

Techne recommends the use of a Dip or Flow Cooler for temperatures down to -35°C. For example,

the RU-200 can lower temperatures down to -20°C. It is also possible to use the cooling coil with a

water supply for temperatures from 5°C above the water temperature to ambient.

To assemble the complete system shown opposite the following products are required:

Product Description

Code

1023300 B-26 stainless steel bath, 26 liter capacity

1016200 TE-10D, digital thermoregulator, 117V

7012549 Flat lid for 18 or 26 liter bath

1070500 RU-200 dip cooler, 117V

liquid temperature baths

All speciﬁ cations are affected by, but not limited to, the size of the bath, the volume of the item(s) being submersed in the bath and

the ambient of the test area. Please contact Techne for assistance.