Full Product Manual

2. Power Cable Connection
3. Operation Setting
ON/OFF: Connect the fridge to the power source; press the ON/OFF
button to start the unit and press the ON/OFF button again to shut
down the unit.
TEMPERATURE: Press “+” or “-” button to increase/decrease the
temperature.
RUNNING MODE: Press button to enter the running modes:
1. ECO (Energy-Saving Mode)
2. MAX (Fast Cooling Mode)
BATTERY PROTECTION SETTING
1. SET the batter protection H level, when the unit is
connected to the car power source.
2. SET the battery protection to M or L level when the unit is
connected to the backup batter or wall outlet using the
power adapter.
To AVOID draining out your car battery, avoid using the fridge
after the car engine is off.
4. FAQ
The appliance is not working
Check the power supply connection
Make sure the plug and socket have a good connection
Check the fuse and see if it was blown
Check if the unit is turned on
Check if the compressor is in delay start protection mode
The food inside is frozen
Adjust the temperature setting to a higher temperature
Hear the sound of liquid owing with the unit
This is normal, due to the ow of refrigerant
Display F1 code on the unit LED display panel
This is the lower power warning
Display F2 code on unit LED display panel
Fan overload warning, turn off the unit and restart the unit
after 30 minutes. If still displayed contact customer service.