Full Product Manual

6. Care and Cleaning
Unplug the fridge before cleaning:
Use soft cloth dampened with warm water to wipe the inner
surfaces andexternal appearance of the fridge.
Use neutral detergent to clean any heavy stains, and dry with
clean soft cloth.
When the fridge is not in use for a long period of time, remove
food and unplug fridge. Clean it and leave the lid open slightly.
Keep fridge in a ventilated space.
NOTE: Do not sprinkle water on the fridge during cleaning
because it can reduce the insulating property of electrical
components and erode the metal parts.
Do not use cleaners containing corrosive and deliquescent
material (such as scouring powder, bleach, soap powder,
alkaline cleansers, benzene, gasoline, acid, hot water and etc.)
to clean the appearance panels, door gaskets and plastic parts.
5. Defrosting
After the refrigerator has been on for a prolonged period of time, frost
could be seen on surfaces in the freezer. Frost reduces refrigerating
effect and can increase the power consumption. In this case, we
recommend you to unplug and empty the fridge. Let frost melt away
and clean the interior with a dry towel.
NOTE: DO NOT use any sharp metal tools to defrost fridge which
could cause damage to fridge.
Display F3 code on unit LED display panel
The compressor protection is activated. Please turn off the
unit after 30 minutes. If still displayed, please contact
customer service.
Display F5 code on the unit LED display panel
Compressor controller module protection is activated. Please
turn off the unit, keep it in a ventilated space and restart the
unit after 30 minutes. If the F5 code is still displayed contact
customer service.
Display F7/F8 code on the unit LED display panel
This is the lower power warning
Display F2 code on unit LED display panel
Temperature sensor error. Please restart the unit. If the F7/F8
code is still displayed, please contact customer service.