Owner`s manual

Analog Input XLR female, Pin 1 ground, Pin 2 positive, Pin 3 negative
Input Impedance = 100k Ohms
Input Sensitivity (1m) = 90 dB @ -18 dBV (pass band)
Analog to Digital
Conversion
Word Length: 24 bit
Sample Rate: 192 kHz
Oversampling = 128x
Signal/Noise ≥ 125 dB
Digital Input XLR female
AES/EBU (AES3 standard)
Input Impedance = 110 Ohms
Word Length: 16,18, 20 or 24 bit
Sample Rate: 32 kHz to 192 kHz
Signal/Noise ≥ 133 dB
Frequency Response 30 Hz - 45 kHz (+/- 3 dB ), 40 Hz - 40 kHz (+/- 1 dB )
Bass Response -3 dB @ 30 Hz
Q = 0.707
Slope = 12 dB/octave
Cabinet 32 liters total internal volume
Sealed subwoofer and midbass enclosures
Machined aluminum baffle plate
Aluminum subwoofer frames function as lateral cabinet bracing
Long fiber wool acoustic damping throughout
Crossover Frequencies 100 / 600 / 3000 Hz
Tweeter 1" ring radiator with Advanced neodymium motor
Rear waveguide chamber
Amplifier: 250W Hypex
Midbass 1 5.25" poly/paper cone with Advanced neodymium motor
+/- 5 mm linear excursion
Amplifier: 250W Hypex
Midbass 2 5.25" poly/paper cone with Advanced neodymium motor
+/- 5 mm linear excursion
Amplifier: 250W Hypex
Subwoofers 2 x 10" aluminum cone with low distortion motor
+/- 13 mm linear excursion
Amplifier: 500W Hypex
Power Mains Voltage Input: 115 or 230 VAC selectable
Idle Power Consumption = 30W
Maximum Power Consumption = 650 W
Weight Speaker: 68 lbs each (31 kg)
Shipping: 80 lbs each (36 kg)
Dimensions HxWxD Cabinet: 20.5 x 9.5 x 15.5 inches (521 x 241 x 394 mm)
Overall: 20.5 x 10.5 x 17.4 inches (521 x 267 x 442 mm)
14. Specifications
12