Owner`s manual

The Mains Voltage Select switch (VAC Select) on the rear panel must be in the 230V position for AC

power line voltages over 132 VAC. Connecting the power cord to AC power line voltages over 132 VAC

while the VAC Select switch is in the 115V position will damage the amplifier. Such damage is NOT

covered under warranty.

Rear panel VAC Select switch location

Please read and follow the safety information below:

 Do not remove the rear amplifier panel. There is a risk of electric shock. No user serviceable parts

are inside. Please refer service issues to a qualified technician.

 Do not operate this device with an ungrounded mains power cable or a mains connection that is

ungrounded. This may result in personal injury.

 Do not place open flames such as lighted candles on or near this device .

 Do not expose this device to water, rain or high humidity. Do not place objects filled with liquids,

such as vases, on or near this device.

 This speaker requires adequate airflow to maintain proper cooling. Do not obstruct airflow

around the speaker. Do not run the speaker upside down (mains power connector on top).

 Do not operate this device in ambient temperatures above 30°C (85°F). Over-temperature may

cause device failure.

Caution! This speaker is capable of producing sound pressure levels in excess of 85dB which may

cause permanent hearing damage. Always verify that input signal levels are attenuated before

powering on the speaker.