User guide

26
TROUBLESHOOTING
PROBLEM SOLUTION
Power
Unit does not power up.
Device synced to Control Out does not turn ON.
a) Conrm Power Cord is plugged in to an unswitched 110V
AC Outlet.
b) If using audio sensing, conrm connection and audio
output from audio source. Also conrm ON/OFF button is
in the ON (in) position.
c) If using voltage sensing, conrm connection, polarity and
voltage from trigger device. Also conrm ON/OFF button is
in the ON (in) position.
d) Conrm connection, polarity and voltage from Control Out
to synced device.
Audio
No Sound From Speakers a) Conrm volume is turned up and un-muted.
b) Conrm source is selected, turned on and playing.
c) Conrm Channel Input switches are set to proper positions.
d) Conrm source audio connections.
e) Conrm speaker connections.
f) Conrm volume control connections, if used.
g) Conrm BUS IN connections, if used.
h) Conrm AUX IN connections, if used.
i ) Conrm Pre-Out/Main In Jumper connections (A/V Receiver
or preamp multiroom system).