Manual

5
Abbildung 3: Montage der Entkupplermechanik an der Kupplungsaufnahme
Figure 3: Mounting the uncoupler mechanism on the coupling mount
2
Abbildung 1+2: Vorbereitung der Rangierkupplung für die Montage
Figure 1+2: Preparing the Switching Coupler for assembly
1
Beide Schrauben entfernen
Remove both screws
Antriebseinheit abheben
Remove drive unit
3
Mechanikeinheit an Kupp-
lungsaufnahme montieren.
(bei PIKO mit kleiner Schraube
und Unterlegscheibe)
Mounting the mechanical unit
on the coupling mount (PIKO
requires small screw and
washer)
Antriebseinheit
Drive unit
Mechanikeinheit
Mechanical unit