User Manual

Master Model MT-76
3 in 1 Triggertorch
Instructions
ONE YEAR FULL WARRANTY
Your Master MT-76 butane powered Microtorch tool was carefully
tested and inspected before it was shipped from the factory. We
warrant this product to be free from defects in materials and
workmanship under normal use and service for one year from date
of purchase. In the event of a defect in materials or workmanship,
we will either repair or replace, without charge, at our option, any
part which in our judgment shows evidence of such defect.
This warranty does not apply if the MT-76 has been misused,
abused, altered, tampered with or used with butane fuel other than
Master Appliance Ultratane butane fuel. At the end of the warranty
period, Master Appliance shall be under no further obligation
expressed or implied. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not
apply to you.
Master Appliance assumes no responsibility for and this warranty
shall not cover any incidental or consequential damages from any
defect in this product or its use. Some states do not allow the
exclusion or limitation of incidental or consequential damages,
so the above exclusion may not apply to you.
This warranty gives you specific rights
and you may also have other
rights which may vary from state to state.
For warranty repair a proof of purchase receipt or other appropriate
proof of date is required with your return for warranty repair to
Master Appliance. All warranty claims must be made to Master
Appliance and not the distributor. We decline responsibility where
repairs have been made or attempted by others. Any different
guarantee made by others is not authorized by us. If a warranty
claim is to be made please return your MT-76 prepaid, with proof
of purchase and a note describing the problem to our customer
service department. See below.
For repair service we charge a flat rate fee. Please call Master
Appliance for the flat rate charge. Return your MT-76 prepaid, with
a note describing the problem. Remove gas befor e shipment.
Master Appliance Corp.
2420 - 18th St.
• Racine, WI 53403
[phone]
Fax: [phone]
www.masterappliance.com
A - Burner Head 4.) Shutter lever
B - Soldering Tip 5.)
Igntion button
C - Heat Tip 6.) Removable stand
1.) Flame Guard (Aperture) 7.) Filler valve
2.) Fuel Adjustment wheel 8.) Hands Free
3.) Safety lo
ck ON/OFF slide
6.5" (L) x 3.8" (H) x 1.3" (W)
165 mm x 97 mm x 34 mm
8.1 oz / 230 g (empty)
120 minutes
Approx. 2500 °F, 1300 °C
(blue flame)
5/8 oz. / 20 ml
WEIGHT
NONSTOP RUN TIME
FLAME TEMP.
FUEL CAPACITY
SIZE
CONTENT AND PARTS IDENTIFICATIONS:
SPECIFICATIONS