Owner's manual

ManualsBrandsMaster Appliance ManualsPower ToolsProheat 1610 STC Dual Mode Heat Gun

PROHEAT

STC

Surface Temperature Control Heat Gun

Instruction Manual

Manual de Instrucciones

Manuel d’utilisation

Gebrauchsanleitung

Please read, understand and keep this manual for future reference.

Por favor lea, comprenda y conserve este manual para futuras referencias.

Veuillez lire, assimiler et conserver le présent manuel à titre d’information.

Bitte lesen, verstehen und diese Anleitung als Referenz behalten.

Assembled in USA

Ensamblado en los EE. UU.

Assemblé aux Etats-Unis

In den USA hergestellt

PROHEAT

STC

Pistola de calor con control

de temperatura de supercie

PROHEAT

STC

Pistolet thermique à régulation

de la température de surface

PROHEAT

STC

Heißluft-Oberächentemperaturregler

Summary of content (7 pages)

PAGE 1
PROHEAT STC ® Surface Temperature Control Heat Gun PROHEAT STC ® Pistola de calor con control de temperatura de superficie PROHEAT STC ® Pistolet thermique à régulation de la température de surface PROHEAT STC ® Heißluft-Oberflächentemperaturregler Instruction Manual Manual de Instrucciones Manuel d’utilisation Gebrauchsanleitung Please read, understand and keep this manual for future reference. Por favor lea, comprenda y conserve este manual para futuras referencias.
PAGE 2
Important Safety Instructions Heat guns are a source of extremely high-temperature flameless heat (up to 1050˚F / 566˚C). Extreme caution should be observed when using these products. READ and FOLLOW these instructions. Las pistolas de calor son fuente de calor sin llama de temperaturas extremadamente altas (hasta 1050 ºF/566ºC). Se debe tener extrema precaución al utilizar estos productos. LEA y SIGA estas instrucciones.
PAGE 3
Warranty and Repair Information Product Warranty Master Heat Tools are carefully tested and inspected before being shipped from the factory. We warrant our products to be free from defects in materials and workmanship, under normal use and service for, one year from date of purchase. In the event of a defect in materials or workmanship we will either repair or replace, without charge at our option, any part which in our judgement shows evidence of such defect.
PAGE 4
Specifications & Operating Instructions Specifications V Hz 120/ 230 50-60 Watt Amp Wt 1320/1426 11 / 6.2 30oz/ 850g Operating Instructions • Plug unit into appropriate electrical outlet • Depress momentary contact switch (laser turns on). • Set desired target temperature and airflow. Target temperature will display on the upper row of the LCD display. • Point the nozzle at the work surface. The lasers will indicate the proper field of view for accurate temperature measurement.
PAGE 5
PH-1600/2600 Surface Temperature Control Heat Gun 1600/2600 Surface Temperature Control Heat Gun ( ) a ( ) ( ( ) b c www.masterappliance.com 1 d 1 ) 2 1 3 www.masterappliance.
PAGE 6
PH-1600/2600 Surface Temperature Control Heat Gun 1600/2600 Surface Temperature Control Heat Gun >5 in >13 cm ~.25 in ~.5 cm 5 in 13 cm 4 in 10 cm 3 in 7.5 cm <3 in <7.5 cm www.masterappliance.com www.masterappliance.
PAGE 7
Master Appliance Corp. 2420 18th St. Racine, WI 53403-2381 USA www.masterappliance.com Tel: 1-800-558-9413 (toll free in the U.S.A. and Canada) Tel: 262-633-7791 (all other Countries) Fax: 262-633-9745 Email: sales@masterappliance.com P/N 58264 REV B © 2013 M.A.