Service manual

Section 1: Introduction
1 - 22 Euphonix CS3000/2000 Operation Manual
Assignable Moving
Faders
Note: The Assignable Moving Faders currently only work in Absolute
mode. Future software releases will enable the use of other automa-
tion modes.
The Assignable Moving Faders are used for central control of any channel’s
upper and lower faders. Using the Channel/Route Select keys, or any fader
block key, gain attention of a channel strip. Now that channel’s upper and
lower faders and mutes can be controlled directly from the Assignable Moving
Faders. It is possible for the engineer to record automation fader moves and
mutes on any channel from the DSC. During automation playback, the moving
faders will track the programmed moves.
Safe Safe
i
d t
i
d t
i
d t
i
d t
Solo Solo
GrpGrp
On On
Automation Punch Key
Fader Null Indicators
Mute
Lower Fader Control
Upper Fader Control
Automation Mode Indicator
(Iso, Dyn, Trim)
Indicates that fader
selected is an upper fader
Indicates that fader
selected is a lower
fader
Mute Punch Key