Instruction manual
4.
8.
5.
7.
11.
6.
10.
9.
3.
2.
1.
3.
YOUR BREADMAN
®
AUTOMATIC BREAD BAKER
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
2
1. Lid
2. Viewing Window
3. Steam Vent
4. Handle
5. Bread Pan
6. Control Panel
7. Drive Shaft
8. Kneading Paddle
9. Power Supply Cord
10. Heating Element
11. Oven Chamber
Symptom
Display Window
shows nothing
Possible Solutions
Make sure the machine is plugged in. If nothing appears in
the Display Window, unplug and plug in again.
START button
doesn’t start
the machine
Make sure the machine is plugged in.
If nothing appears in the Display Window, press Select to
choose your Baking Cycle. (You must select a Baking
Cycle before pressing Start.)
If the baking area is too hot, the Breadman
®
will not start
because of an automatic safety feature. Remove the Bread
Pan with your ingredients, and wait until the Breadman
®
cools down — about 20 minutes — before starting a
new loaf.
Can’t set the Timer If you selected either the Rapid Bake or Dough Cycle,
you should not use the Timer. This is because the
ingredients should be processed immediately for
these cycles.
After starting, the
Display Window
flashes “E:01”
If the bread machine is too hot, it will not start because
of an automatic safety feature.
Remove the Pan and let the bread machine cool down
until “E:01” disappears and the selection reappears. You
may then start the cycle.
The Breadman
®
doesn’t mix the
ingredients
On preheating the (:) in the Time Display flashes and
Kneading Paddle will not move. There is a 4 - 5 min. rest
period on some of the cycles in which there will be no
movement in the pan for 4 - 5 min. If the Kneading
Paddle does not operate after this period of time,
check to see if the Kneading Paddle is engaged in the
machine correctly.
The Breadman
®
stops This happens if you press the Stop button, if you unplug
the machine, or if there is a power outage. In each case,
the Breadman
®
can't be restarted for this Cycle.
Discard the contents of the Bread Pan and start again
with new ingredients.
17
TROUBLE SHOOTING