- CMF Smokey Mountain Series Gas Smoker Models 2505G 3405G 3405GW 3405BG 3005G 3405GT 3605G 3405BGW Assembly and Owner's Manual

Hardware:
Tools needed:
Assembly Step 2
7
HARDWARE BAG
Phillips Head
Screwdriver
1. Set the cabinet assembly top side down.
2.
3. DO NOT yet insert the two bolts in the
locations indicated. These two bolts will
be used in the next assembly step.
For each leg, line up the holes
and insert the bolts. Nuts are
pre-welded to the cabinet.
One leg
contains an extra hole
on its side and must be
mounted at the front in
the position shown.
This hole will later be
used to secure the
gas hose to the leg
with a zip-tie.
IMPORTANT:
Locate these parts:
Cabinet
Assembly
4 Legs
Leg with
extra hole
1/4-20 x 5/8” Bolts
16 Required
A